Page 59 - Handbook of Plastics Technologies

INTRODUCTION TO POLYMERS AND PLASTICS

INTRODUCTION TO POLYMERS AND PLASTICS 1.45

57. C. Rauwendaal, Polymer Extrusion, 2nd ed., Hanser/Gardner Publications, Cincinnati, OH
(1990), p. 24
58. Twin Screw Report, Somerville, NJ, American Leistritz Extruder Corp., (Nov., 1993).
59. http://www.ndhmedical.com/html/extrusion.htm, last accessed August 30, 2005.
60. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p. 2.
61. N.G. McCrum, C.P. Buckley, and C.B. Bucknall, Principles of Polymer Engineering, 2nd ed.,
Oxford University Press, New York, 1997, p. 334.
62. N.G. McCrum, C.P. Buckley, and C.B. Bucknall, Principles of Polymer Engineering, 2nd ed.,
Oxford University Press, New York, 1997, p. 338.
63. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p.
172.
64. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p.
173.
65. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p.
178.
66. G. Pötsch and W. Michaeli, Injection Molding, Hanser Publishers, Munich, Germany, 1995, p.
177.
67. R.A. Malloy, Plastic Part Design for Injection Molding, Carl Hanser Verlag, Munich, 1994, p.
396.
68. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, p. 17.
69. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, p. 18.
70. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, p. 19.
71. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, p. 20.
72. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, p. 21.
73. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, p. 22.
74. J.L. Throne, Technology of Thermoforming, Carl Hanser Verlag, Munich, 1996, p. 23.

Downloaded from Digital Engineering Library @ McGraw-Hill (www.digitalengineeringlibrary.com)
Copyright © 2006 The McGraw-Hill Companies. All rights reserved.
Any use is subject to the Terms of Use as given at the website.