Page 293 - Industrial Power Engineering and Applications Handbook

11/272 Industrial Power Engineering and Applications Handbook
Notes
1 In the tables of relevant Standards in this hook while the latest editions of the standards are provided, it is possible that revised editions
have become available. With the advances of technology and/or its application, the updating of standards is a continuous process by
diffcrcnt standards organizations. It is therefore advisable that for more authentic references, readers should consult the relevant
organizations for the latest version of a standard.
2 Some of the BS or IS standards mentioned against IEC may not be identical
3 The year noted against each standard may also refer to the year of its last amendment and not necessarily the year of publication.

Further reading 6. IS1 DOC ETDC 15 (2729), Indian standard Institute Draft
Documents forElectroTechnica1 Division Council, for limits of
vibration.
1. Bartheld R.G., Motor Noise. 7. Renganian, S., Agrawal, MD. and Nema, R.S. ‘Behaviour of
2. DOC-ETDC 15(3059), Recommendation on insulation resistance high voltage machine insulation system in the presence of thermal
test for 3.3 kV motors, 1000 kW and above, June (1987). insulation and electrical stresses’, IEEE Trans. on EIEI 20, No.
3. Essler, H. andMohanT.R., ‘Noise inelectrical machines,’Siemens I, Feb. (1985).
Circuit, IV No. 3, April (1969). 8. Rhudy, R.G. et al., ‘Impulse voltage strength of AC rotating
4. Hogg, W.K., Miller, R., Rabech, G. and Ryder, D.M., ‘The machines’ IEEE Trans. PAS, 100, No. 8(1981).
relationship of partial discharge amplitude distribution with 9. Secco, M., Bressani, M. and Razza, E, Medium Motor and
electric damage at different levels of voltage and frequency’, Generator Plant, Ansaldo Componenti SPA, Italy. Progress and
IEEE Symposium on Electrical Insulation, USA, June (1 984). development trends in large induction motor stator winding
5. IEEE, Results of an investigation on the over voltages due to a insulation.
vacuum circuit breaker when switching an H. V motor, IEEE 85 10. Simons, J.S., ‘Diagnosis of H.V. machine insulation’, IEEE
SM 370-2(1985). Proceedings, 127, May (1980).