Page 479 - Industrial Power Engineering and Applications Handbook

Testing of metal-enclosed switchgear assemblies 14/453
60044-6/1992 Protective current transformers 2705-3/ 1992 BS 7626/1993
Requirements for transient performance 2705-4/ 1992
601 86/1995 Capacitive voltage transformers 3156-1 to 4/1992 BS 7625/1993
General requirements for measurement and BS 7729/1995
protection (all voltages)
6005 1 - 111997 Direct acting indicating analogue electrical measuring 1248-1 to 9 BS 89-1/1990
instruments and their accessories
Definitions and general requirements
60060- 111 989 High voltage test techniques - General definitions and 207 1- 1/1993 BS 923-111990
test requirement
60060-2/1994 High voltage test techniques. Measuring systems 207 1-2/1991 BSEN 60060-2/1997
207 1-3/199 1
60298/1994 A.C. metal enclosed switchgear and controlgear for 3427/1991 BSEN 60298/1996
rated voltages above 1kV and up to and including 52kV
60439-1/1992 Low voltage switchgear and controlgear assemblies 8623-1/1993 BSEN 60439-111994
Type-tested and partially type-tested assemblies
60439-2/1987 Particular requirements for busbar trunking systems (busways) 8623-2/1993 BSEN 60439-2/1993
60694/1996 Common specifications for high voltage switchgear and 3427/1991 BSEN 60694/1997
controlgear standards
60898/1995 Electrical accessories: circuit breakers for over current 8828/1996 BSEN 60898/1991
protection for household and similar installations
60980/1989 Recommended practices for seismic qualification of
electrical equipment of the safety system for nuclear
generating stations
Code of practice for selection, installation and maintenance 10118-3/1991
of switchgear and controlgear up to 1 kV. Installation
Criteria for earthquake resistant design of structures 1893/1991 DDENV 1998 (1-5)
11996
Specification for high voltage busbars and busbar 8084/1992 BS 159/1992
connections
Relevant US standards ANSUNEMA and IEEE

IEEE 4/1995 Standard techniques for HV testing
ANSI C.37.51/1989 Switchgear metal enclosed low voltage a.c. power circuit breaker switchgear assemblies-conformance test
procedures
ANSI C.37.55/1989 Metal clad switchgear assemblies. Conformance test procedures
ANSI C37.57/1990 Metal enclosed interrupter switchgear assemblies. Conformance test procedures.
ANSI/IEEE 37.81/1989 Guide for seismic qualification of class IE metal enclosed power switchgear assemblies
ANSVIEEE-308/ 1992 Criteria for class IE power system for nuclear power generating station
ANSIAEEE-323/199 1 Qualifying class 1 E equipment for nuclear power generating station
ANSI/IEEE-336/199 1 Standard Installation, Inspection and testing requirements for power instrumentation and control equipment at
nuclear facilites
ANSIAEEE-344/1993 Recommended practices for seismic qualification of class 1E equipment for nuclear power generating stations (NPGS)
ANSI/IEEE-649/1992 For qualifying class IE motor control centres for nuclear power generating stations (NPGS)
ANSVIEEE-693/199 1 Seismic design of substation equipment
NEMA 250/1991 Enclosure for electrical equipment up to IOOOV. Test criteria and design tests
NEMAlICS 6/1996 Industrial controls and systems. Enclosures

Notes
1 In the tables of relevant Standards in this book while the latest editions of the standards are provided, it is possible that revised editions
have become available. With the advances of technology and/or its application, the updating of standards is a continuous process by
different standards organizations. It is therefore advisable that for more authentic references, readers should consult the relevant
organizations for the latest version of a standard.
2 Some of the BS or IS standards mentioned against IEC may not be identical.
3 The year noted against each standard may also refer to the year of its last amendment and not necessarily the year of publication.