Page 342 - System on Package_ Miniaturization of the Entire System

316 Cha pte r F i v e

37. H. Jiang, Y. Wang, J.-L. A. Yeh, and N. C. Tien, “Fabrication of high-performance on-
chip suspended spiral inductors by micromachining and electroless copper plating,”
Microwave Symposium Digest., 2000 IEEE MTT-S International, vol. 1, 2000, pp. 279–82.
38. Dong-Wook Kim, In-Ho Jeong, Ho-Sung Sung, Tong-Ook Kong, Jong-Soo Lee,
Choong-Mo Nam, and Young-Se Kwon, “High performance RF passive integration
on Si smart substrate,” 2002 IEEE MTT-S International Microwave Symposium Digest,
vol. 3, 2002, pp. 1561–1564.
39. M. F. Davis, S.-W. Yoon, S. Pinel, K. Lim, and J. Laskar, “Liquid crystal polymer-based
integrated passive development for RF applications,” 2003 IEEE MTT-S International
Microwave Symposium Digest, vol. 2, issue 8, June 13, 2003, pp. 1155–58.
40. S. Dalmia, Lee Seock Hee, V. Sundaram, Min Sung Hwan, M. Swaminathan, and R.
Tummala, “CPW high Q inductors on organic substrates,” Electrical Performance of
Electronic Packaging, 2001, vol. , issue 2001, pp. 105–108.
41. S. H. Lee, S. Min, D. Kim, S. Dalmia, W. Kim, V. Sundaram, S. Bhattacharya, G.
White, F. Ayazi, J. S. Kenney, M. Swaminathan, and R. R. Tummala, “High perfor-
mance spiral inductors embedded on organic substrates for SOP applications,” 2002
IEEE MTT-S International Microwave Symposium Digest, vol. 3, 2002, pp. 2229–32.
42. S. Dalmia, F. Ayazi, M. Swaminathan, Min Sung Hwan, Lee Seock Hee, Kim
Woopoung, Kim Dongsu, S. Bhattacharya, V. Sundaram, G. White, and R. Tummala,
“Design of inductors in organic substrates for 1-3 GHz wireless applications,” 2002
IEEE MTT-S International Microwave Symposium Digest, vol. 3, 2002, pp. 1405–08.
43. K. C. Eun, Y. C. Lee, J. W. Lee, M. S. Song, and C. S. Park, “Fully embedded LTCC
spiral inductors incorporating air cavity for high Q-factor and SRF,” Proc. 54th
Electronic Components and Technology Conference, vol. 1, June 2004, pp. 1101 –03.
44. G. Carchon, S. Brebels, K. Vaesen, W. De Raedt, and E. Beyne, “Spiral inductors
in multi-layer thin film MCM-D,” presented at IMAPS Europe, Krakow, Poland,
September 4–6, 2002.
45. S. Dalmia, Kim Woopoung, Min Sung Hwan, M. Swaminathan, V. Sundaraman,
Liu Fuhan, G. White, and R. Tummala, “Design of embedded high Q-inductors in
MCM-L technology,” 2001 IEEE MTT-S International Microwave Symposium Digest,
vol. 3, 2001, pp. 1735–38.
46. S. Pinel, F. Cros, S. Nuttinck, S.-W. Yoon, M. G. Allen, and J. Laskar, 2003 IEEE MTT-S
International Microwave Symposium Digest, vol. 3, June 8–13, 2003, pp. 1497–1500.
47. Yong-Jun Kim and Mark G. Allen, “Surface micromachined solenoid inductors
for high frequency applications,” IEEE Transaction on Component Packaging and
Manufacturing Technology, Part C, vol. 21, issue 1, January 1998.
48. C. H. Ahn and M. G. Allen, IEEE Transactions on Industrial Electronics, vol. 45, issue 6,
December 1998, pp. 866–76.
49. K. Yanagisawa, A. Tago, T. Ohkubo, and H. Kuwano, “Magnetic micro-
actuator,” Proc. 4th IEEE Workshop on Microelectromechnical Systems, Nara, Japan, 1991,
pp. 120–24.
50. H. Guckel, K. J. Skrobis, T. R. Christenson, J. Klein, S. Han, B. Choi, E. G. Novell,
and T. W. Chapman, “On the application of deep X-ray lithography with sacrificial
layers to sensor and actuator construction,” J. Micromech. Microeng., vol. 1, no. 4,
1991, pp. 135–38.
51. B. Wagner, M. Kreutzer, and W. Benecke, “Linear and rotational magnetic micromo-
tors fabricated using silicon technology,” Proc. IEEE Microelectromechanical Systems
Workshop, 1992, pp. 183–89.