Page 344 - System on Package_ Miniaturization of the Entire System

318 Cha pte r F i v e

70. G. Papaioannou, M. Exarchos, V. Theonas, G. Wang, and J. Papapolymerou, “On the
dielectric polarization effects on capacitive mems switches,” IEEE MTT-S, 2005.
71. Radiant MEMS 2006, http://www.radantmems.com.
72. B. Ducarouge, D. Dubuc, F. Flourens, S. Melle, E. Ongareau, K. Grenier, A. Boukabache,
V. Conedera, and P. Pons, “Power capabilities of RF MEMS,” International Conference
on Microelectronics, 2004.
73. D. Thompson, M. Tentzeris, and J. Papapolymerou, “Packaging of MMICs in mul-
tilayer LCP substrates,” IEEE Microwave and Wireless Components Letters [see also
IEEE Microwave and Guided Wave Letters], vol. 16, issue 7, July 2006, pp. 410–12.
74. N. Kingsley, “Development of miniature, multilayer, integrated, reconfigurable RF
MEMS communication module on liquid crystal polymer (LCP) substrate,” Doctoral
dissertation, Georgia Institute of Technology, Atlanta, GA.
75. N. D. Kingsley, G. Wang, and J. Papapolymerou, “Comparative study of analytical
and simulated doubly-supported RF MEMS switches for mechanical and electrical
performance,” Applied Computational Electromagnetics Society Journal, vol. 21, no. 1,
March 2006, pp. 9–15.
76. N. D. Kingsley and J. Papapolymerou, “Organic ‘wafer-scale’ packaged miniature
4-bit RF MEMS phase shifter,” IEEE Transactions on Microwave Theory and Techniques,
vol. 54, issue 3, March 2006, pp. 1229–36.
77. S. Basat, S. K. Bhattacharya, A. Rida, T. Vidal, R. Vyas, L. Yang, and M. Tentzeris,
“Characterization of paper substrates for ultra-low-cost integrated RFID tags for
chemical, pharmaceutical, and bio-sensing applications,” 57th Electronic Components
and Technology Conference, Reno, May 2007.
78. S. Basat, S. K. Bhattacharya, L. Yang, A. Rida, M. Tentzeris, and J. Laskar, “Design of
a novel high-efficiency UHF RFID antenna on flexible LCP substrate with high read-
range capability,” IEEE Antennas and Propagation Society International Symposium,
July 9–14, 2006, Albuquerque, NM, pp. 1031–34.
79. Mina Rais-Zadeh, Paul A. Kohl, and Farrokh Ayazi, “High-Q micromachined silver
passives and filters,” International Electron Devices Meeting, vol. , no. , December
11–13, 2006, pp. 1–4.
80. G. J. Carchon, Walter De Raedt, and E. Beyne, “Wafer-level packaging technology for
high-Q on-chip inductors and transmission lines,” IEEE Transactions on Microwave
Theory and Techniques, vol. 52, issue 4, April 2004, pp. 1244–51.
81. A. Sutono, A. Pham, J. Laskar, and W. R. Smith, “Development of three dimensional
ceramic-based MCM inductors for hybrid RF/microwave applications,” 1999 IEEE
Radio Frequency Integrated Circuits (RFIC) Symposium, vol. , Iss. , 1999, pp. 175–78.
82. J. Harada, Y. Sugimoto, Y. Higuchi, and Y. Sakabe, “Novel LTCC system of cofired
low/high materials for wireless communications,” IMAPS/ACerS 2nd International
Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies,
Denver, CO, April 2006.
83. T. Oda and M. Tomita, “New LTCC technology with integrated components—
‘developments and future trends’—module miniaturization for wireless network
applications,” IMAPS/ACerS 2nd International Conference and Exhibition on Ceramic
Interconnect and Ceramic Microsystems Technologies, Denver, CO, April 2006.
84. L. Jauniskis, B. Farrell, A. Harvey, and S. Kennedy, “LCP PCB-based packaging for
high-performance protection,” Advanced Packaging, October 2006, pp. 40–42.
85. Kai Zoschke, Jürgen Wolf, Michael Töpper, Oswin Ehrmann, Thomas Fritzsch, Katrin
Scherpinski, Herbert Reichl, and Franz-Josef Schmückle, “Fabrication of application