Page 186 - Low Temperature Energy Systems with Applications of Renewable Energy

Heat pumps in the drying industry 173

[6] Keey RB. Drying. Principles and practice. Oxford: Pergamon; 1975. 376 p.
[7] Strumillo C, Kudra T. Drying: principles, applications, and design. New York: Gordon and
Breach; 1986. 448 p.
[8] Keey RB. Drying of loose and particulate materials. New York: Hemisphere; 1992. 504 p.
[9] Mujumdar AS, editor. Handbook of industrial drying. 3rd ed. New York: Taylor & Francis;
2007. 1280 p.
[10] Alves-Filho O. Heat pump drying of fruits and roots. The influence of heat and mass
transfer on dryer characteristics [Ph.D. thesis]. Trondheim, Norway: Norwegian University
of Science and Technology; 1996. 120 p.
[11] Sosle V. A heat pump dehumidifier assisted dryer for agrifoods [Ph.D. thesis]. Montreal,
Canada: McGill University; 2002. 120 p.
[12] Hodgett DL. Efficient drying using heat pumps. Chemical Engineer 1976:510e2.
[13] International symposium on the industrial application of heat pump, 1982.
[14] Sylla R, Abas S, Tai K. The potential for heat pump in drying and dehumidification
System. International Journal of Energy Research 1982;6(4).
[15] Ray D. Energy saving in industry: reference manual for engineering and technical workers.
Transl. Eng. Energoizdat; 1983. 208 pp. [in Russian]
[16] Lykov MV. Drying in chemical industry. Chemistry 1970. 432 pp. [in Russian].
[17] Romanov EV, Orlov AY. The possibility of using heat pumps in the drying process. Dept.
of Chemical Engineering, GOU VPO “TGTU”; 2008 [in Russian].
[18] Rubinstein H. Drying with heat pumps. Energy Technology 1983;(2).
[19] Kudra T, Mujumdar S. Heat pump drying: advanced drying technologies. 2nd ed. 2008.
New York.
[20] MacArthur JW. International Journal of Refrigeration 1984;7(2):123.
[21] Song X. Low temperature fluidized bed drying with temperature program [Ph.D. thesis].
Trondheim, Norway: The Norwegian Institute of Technology, Division of Refrigeration
Engineering; 1990 [in Norwegian].
[22] Strpmmen I, Kramer K. New applications of heat pumps in drying process. Drying
Technology 1994;12(4):889e901.
[23] Prasertsan S, Saensaby P. Heat pump drying of agricultural materials. Drying Technology
1998;16(1 and 2):235e50.
[24] Saensabai P, Prasertsan S. Effect of component arrangement and ambient and drying
conditions on the performance of heat pump dryers. Drying Technology 2003;21(1):
103e27.
[25] Perry EJ. Drying by cascaded heat pumps. Proc. Institute of Refrigeration Management;
1981. p. 1e8.
[26] Matsuo K, Senshu T, Hayashi M, Kokuba H. How can heat pumps be made more cost
competitive?. In: Proc. Int. Energy agency heat pump conference. May, Graz, Austria.
Boras, Sweden: IEA Heat Pump Centre; 1984. p. 87e96.
[27] Geeraert B. Energy saving in drying application with special emphasis on the use of heat
pumps. Revue Energy. Primery 1983;18(1).
[28] Van der Pal M, Sun Q, Simpson I, Scharpf E, Carrington G. Influence of kiln venting on
brown stain in Pinus Radiata sapwood. Drying Technology 2007;25(6):1105e10.
[29] Sunthonvit N, Srzednicki G, Craske J. Effects of drying treatments on the composition of
volatile compounds in dried nectarines. Drying Technology 2007;25(5):877e81.
[30] Hawlader MNA, Perera CO, Tian M. Comparison of the retention of 6-gingerol in drying
of ginger under modified atmosphere heat pump drying and other drying methods. Drying
Technology 2006;24(1):51e6.