Page 536 - Marine Structural Design

512 Part IV Structural Reliability

28.6 References
1. Itagaki, H., Akita, Y., and Nitta, A (1983), “Application of Subjective Reliability Analysis
to the Evaluation of Inspection Procedures on Ship Structures”, Proc. Int. Symp. On the
Role of Design, Inspection and Redundancy in Marine Structural Reliability, National
Academic Press, Nov.
2. Madsen, H.O. et a1 (1986), “Methods of Structural Sufefy’l, Prentice-Hall, Inc., Englewood
Cliffs .
3. Moan, T., (1993), “Reliability and Risk Analysis for Design and Operations Planning of
Offshore Structures”, Proc of the 6th Intl. Conf. on Struct. Safety and Reliability,
ICOSSAR’93.
4. Moan, T., (1997), “Current Trends in the Safety of Offshore Structures, Keynote Lecture”,
Proc. 7th ISOPE, Vol. VI, Honolulu, USA.
5. Moan, T. and Song, R. (1998), “Implication of Inspection Updating on System Fatigue
Reliability of Offshore Structures”, Proceedings of 17th Offshore Mechanics and Arctic
Engineering (OMAE’98), Portugal, July.
6. Newman, J.C. and Raju, I.S. (1981), “An Empirical Stress Intensity Factor Equation for
Surface Crack”, Engng. Frac. Mech., Vol. 15, 185-192.
7. Paris, P.C. and Erdogan, F. (1963), “A Critical Analysis of Crack Propagation Laws”, J. of
Basic Engng, Trans. ASME, Vol. 85.
8. Shinozuka, M. and Deodatis, 0. (1 989), “Reliability of Marine Structures under Bayesian
Inspection”.
9. Song, R. and Moan, T. (1998), “Fatigue Reliability of Large Catamaran considering
Inspection Updating”, Proceeding of the 8th International Offshore and Polar Engineering
Conference (ISOPE’98), Montreal, Canada, May.
10. Song, R. and Zheng, P. (1999), “Reliability Assessment of Offshore Structures at Cold
Phase Considering Inspection Effect”, Proceeding of the 9th International Offshore and
Polar Engineering Conference (ISOPE’99), Brest, France, May.
11. Sun H. and Bai, Y. (2001), “Time-Variant Reliability of FPSO Hulls”, SNAME
Transactions, Vol. 109.
12. Xu, T. and Bea, R. (1997), “Marine Infrastructure Rejuvenation Engineering-Fatigue and
Fracture of Critical Structural Details (CSD),” JIP report, Marine Technology &
Management Group, University of California at Berkeley.
13. Xu, T., Bai, Y., Wang, M. & Bea, R.G. (2001), “Risk based Optimum Inspection of FPSO
Hulls”, OTC12949, May 2001.
14. Yang, J.N., (1 976), “Inspection Optimization for Aircraft Structures Based on Reliability
Analysis”, Journal of Aircraft, AAIA Journal, Vol. 14, No. 9, pp. 1225-1234.
15. Yazdan, N. and Albrecht, P. (1990), “Probabilistic Fracture Mechanics Application to
Highway Bridges”, Engng. Frac. Mech., Vol. 37, pp. 969-985.