Page 113 - Mastering SolidWorks
P. 113
|
82 CHAPTER 3 Working With SketcheS and reference geometry
Figure 3.23
The equation driven
curve
Propertymanager
The Straight Slot and Curved Slot tools draw slots of a given width and length with full
rounds on the ends. All the Slot sketch entities can be seen in the PropertyManager shown in
Figure 3.24. If you need to draw a composite slot or a slot with multiple entities, you need to use
the bidirectional sketch offset with capped ends mentioned earlier.
Figure 3.24
The Propertymanager
for the Slot
sketch entities
