Page 340 - Mastering SolidWorks
P. 340
|
312 CHAPTER 9 PAtterning And Mirroring
3. Click the Rib tool on the Features toolbar, or select it from the menu at Insert ➢
Features ➢ Rib. Set the material arrow to go down toward the block and the thickness
setting to go to the inside by .375 inches. The PropertyManager and the preview should
look like Figure 9.35.
Figure 9.35
Applying the rib feature
4. Create a linear pattern using the rib, making the pattern reach 2 inches into the part.
5. Create a chamfer on the same side of the part as the original rib, as shown in Figure 9.36.
The chamfer is an Angle-Distance using 60 degrees and 0.5 inches.
Figure 9.36
Additional features
on the part
6. Create a round hole, sized and positioned as shown.
