Page 198 - Mechanical Engineers' Handbook (Volume 2)

References 187

37. H. N. Norton, Sensor and Analyser Handbook, Prentice-Hall, Englewood Cliff, NJ, 1982, p. 337.
38. R. P. Benedict, Fundamentals of Temperature, Pressure, and Flow Measurement, 2nd ed., Wiley,
New York, 1977, pp. 38–9.
39. Technical Bulletin MCT-18l, Victory Engineering Corporation, Springfield, NJ, 1968.
40. ‘‘YSI Precision Thermistor Products,’’ Yellow Springs Instrument Co., Yellow Springs, OH, 1980.
41. K. Park, ‘‘Improvement in Electrical Stability by Addition of SiO 2 in (Mn 1.2 Ni 0.78 Co 0.87 Cu 0.15 Si x )O 4
Negative Temperature Coefficient Thermistors,’’ Scripta Materialia 50, 551–554 (2004).
42. M. Tagawa, K. Kato, and Y. Ohta, ‘‘Response Compensation of Thermistors: Frequency Response
and Identification of Thermal Time Constant,’’ Review of Scientific Instruments 74(3), 1350–1358
(2003).
43. Temperature Measurement Handbook and Encyclopedia, Omega Engineering, Stamford, CT, 1985,
pp. T75–T76.
44. J. S. Steinhart and S. R. Hart, ‘‘Calibration Curves for Thermistors,’’ Deep Sea Research 15, 497
(1968).
45. A. S. Bennet, ‘‘The Calibration of Thermistors over the Temperature Range of 0–30 C,’’ Deep Sea
Research, 19, 157 (1972).
46. L. Seren, C. B. Panchal, and D. M. Rote, ‘‘Temperature Sensors for OTEC Applications,’’ ANL/
OTEC-PS-12, Argonne National Laboratory, U.S. Department of Energy, May 1984.
47. G. Bosson, F. Guttmann, and L. M. Simmons, ‘‘A Relationship between Resistance and Temperature
of Thermistors,’’ Journal of Applied Physics 21, 1267–1268 (1950).
48. R. N. Bigelow, P. S. Carlson, A. M. Hunter, and S. R. King, ‘‘Radiation Thermometry,’’ in Mea-
surement Science Conference Proceedings, 1996.
49. R. R. Dils, ‘‘High Temperature Optical Fiber Thermometer,’’ Journal of Applied Physics 54, 1198–
1201 (1983).
50. K. A. Wickersham, ‘‘New Thermometry Technique Measures Component Temperature,’’ in Elec-
tronic Packaging and Production, Cahners Publishing, September 1981.
51. D. M. Cunningham, S. W. Allison, and D. B. Smith, ‘‘Thermographic Properties of Eight Blue-
Emitting Phosphors,’’ ISA 1993, Paper No. 93-111, in Proc. 39th Int. Inst. Symp. Albuquerque, NM,
May 1993.
52. S. C. Jensen, S. D. Tilstra, G. A. Barnabo, D. C. Thomas, and R. W. Phillips, ‘‘Fiber Optic Tem-
perature Sensor for Aerospace Applications,’’ in Proceedings of SPIE, Vol. 1369, International So-
ciety for Optical Engineering, 1991, pp. 87–95.
53. R. Raja and G. T. Cunningham, ‘‘Experimental Investigation of Phosphor Thermography Using a
Blue LED optical excitation Source,’’ in ISA TECH/EXPO Technology Update Conference Pro-
ceedings, Vols. 424–425, 2002, pp. 1085–1092.
54. D. Farina, J. Hacker, J. K. Eaton, and R. J. Moffat, ‘‘Illuminant Invariant Calibration of Thermo-
chromic Liquid Crystals,’’ paper presented at the ASME National Heat transfer Conference, August
8–11, 1993.
55. H. S. Rhee, J. R. Koseff, and R. L. Street, ‘‘Flow Visualization of a Recirculating Flow by Rheo-
scopic Liquid and Liquid Crystal Techniques,’’ Experiments in Fluids 2, 57–64 (1984).
56. K. Hollingsworth, A. L. Boehman, E. G. Smith, and R. J. Moffat, ‘‘Measurement of Temperature
and Heat Transfer Coefficient Distributions in a Complex Flow Using Liquid Crystal Thermography
and True-Color Image Processing,’’ Collected Papers in Heat Transfer, ASME HTD 123, 35–42
(1989).
57. V. Rajendran, M. Deblock, T. Wetzel, M. Lusted, C. Kaminski, and B. Childers, ‘‘Use of Fiber Optic
Based Distributed Temperature Measurement System for Electrical Machines,’’ Proceedings of
SPIE—The International Society for Optical Engineering; 5191, 214–225 (2001).
58. M. Decreton, L. Binard, C. Delrez, W. Hebel, and W. Schubert, ‘‘High-Temperature Measurements
by Noise Thermometer,’’ High Temperature—High Pressure, 12, 395–402 (1980).
59. H. Nyquist, Physics, 32, 110–113 (1928, rev. ed.).
60. J. B. Johnson, Physics 32, 97–110 (1928, rev. ed.)
61. H. Brixy, R. Hecker, K. F. Rittinghaus, and H. Howener, ‘‘Applications of Noise Thermometry in
Industry under Plant Conditions,’’ in Temperature, Its Measurement and Control in Science and
Industry, J. F. Schooley (ed.), Reinhold, New York, 1982, pp. 1225–1237.
62. H. Brixy, R. Hecker, J. Oehmen, and E. Zimmermann, ‘‘Temperature Measurements in the High-
Temperature Range (1000–2000C) by Means of Noise Thermometry,’’ High temperatures–High
Pressures 23(6) 625–631 (1991).