Page 103 - Mechanics of Asphalt Microstructure and Micromechanics

96 Ch a p t e r Th r e e

Guo, J.F., Cai, Y.L. and Wang, Y.P. (1995). Morphology-based interpolation for 3D medical image
reconstruction. Computerized Medical Imaging and Graphics, Vol.19, No.3, pp.267–279.

Hilliard, J.E. (1962). Specification and measurement of microstructural anisotropy. Transactions,
AIME. Vol.224, pp.1201–1211.
Hilliard, J.E. (1967). Determination of structure anisotropy. Proceedings, 2nd International Congress
for Stereology. New York, pp.219–228.
Hsieh, J. (2003). Computed Tomography: Principles, Design, Artifacts, and Recent Advances.
SPIE Optical Engineering Press, Bellingham.
Kanatani, K.I. (1984a). Stereological determination of structural anisotropy. International Journal
of Engineering Science, Vol.22, No.5, pp.531–546.
Kanatani, K.I. (1984b). Distribution of directional data and fabric tensors. International Journal of
Engineering Science, Vol.22, No.2, pp.149–164.
Kanatani, K.I. (1985). Procedures for stereological estimation of structural anisotropy. Interna-
tional Journal of Engineering Science, Vol.23, No.5, pp.587–598.
Kuo, C.Y., Frost, J.D. and Chameau, J.L.A. (1998). Image analysis determination of stereology
based fabric tensors. Geotechnique, Vol.48, No.4, pp.515–525.
Kutay, M.E., Aydilek, A.H. and Masad, E. (2007). Computational and experimental evaluation
of hydraulic conductivity anisotropy in hot-mix asphalt. International Journal of Pavement
Engineering, Vol.8, No.1, pp.29–43.
Kutay, M.E. and Emin, M. (2009) Pore pressure and viscous shear stress distribution due to wa-

ter flow within asphalt pore structure, Computer-Aided Civil and Infrastructure Engineering.
VolDŽ24, pp.212–224.
Lacy, T.E., McDowell, D.L, Willice, P.A. and Talreja, R. (1997). On representation of damage
evolution in continuum damage mechanics. International Journal of Damage Mechanics. Vol.6,
pp.62–95.
Lacy, T.E., McDowell, D.L, Willice, P.A. and Talreja, R. (1999). Gradient concept for evolution of
damage. Mechanics of Materials. Vol.31, pp.831–860.
Lin, W.C., Liang, C.C. and Chen, C.T. (1988). Dynamic elastic interpolation for 3D medical image
reconstruction from serial cross section. IEEE Trans. Med. Imaging. Vol.7, No.3, pp.225–232.
Masad, E. and Button, J. (2004). Implications of experimental measurements and analyses of the
internal structure of hot-mix asphalt. Transportation Research Record, No. 1891, pp. 212–220.
Masad, E; Tashman, L. Somedavan, N. and Little, D. (2002). Micromechanics-based analysis
of stiffness anisotropy in asphalt mixtures. Journal of Materials in Civil Engineering. Vol.14,
No.5, pp.374–383.
Mauhlhaus, H-B. and Vardoulakis, I. (1987). The thickness of shear bands in granular materials.
Geotechnique, Vol.37, No.3, pp.271–283.
Mehrabadi, M.M. and Nemat-Nasser, S. (1983). Stress, dilatancy and fabric in granular materials.
Mechanics of Materials. Vol.2, pp.155–161.
Murakami, S. (1988). Mechanical modeling of material damage. Journal of Applied Mechanics,
Vol.55, pp.280–286.
Nemat-Nasser, S and Mehrabadi, M. (1984). Micromechanically based rate constitutive descrip-
tions for granular materials. Mechanics of Engineering Materials. John Wiley & Sons Ltd.,
pp.451–463.
Oda, M. (1972a). Initial fabrics and their relations to mechanical properties of granular material.
Soils and Foundations. Vol.12, No.1, pp.17–36.
Oda, M. (1972b). The mechanism of fabrics changes during compressional deformation of sand.
Soils and Foundations. Vol.12, No.2, pp.1–18.