Page 125 - Membranes for Industrial Wastewater Recovery and Re-Use
P. 125

100  Membranes for Industrial  Wastewater Recovery and Re-use

          It  is  evident  that  as membrane  technologies  advance  and  the  efficiency of
          removing salts and other impurities from water increases, the use of  reclaimed
          water for cooling and boiler applications will increase. A promising opportunity
          is the development of cost-effective treatment systems for treatment of blowdown
          water  from cooling and boiler applications to produce high-quality  water for
          make-up water or other applications. Three case studies relating to power plants
          are detailed in Sections 5.1-5.3.



          References
          Adams, A.P., Garbett, M., Rees, H.B.  and Lewis, B.G.  (1978). Bacterial aerosols
          from cooling towers. J, Water Pollution Control Federation, 50,2362-2369.
            Asano, T. and Levine, A.D.  (1998). Wastewater reclamation, recycling, and
          reuse: an introduction. In Asano, T. (ed.) Wastewater reclamation and reuse.
          Technomic, Lancaster, Basel,  pp. 1-56.
            Asano, T., Mujeriego, R.  and Parker, J.D.  (1988). Evaluation  of  industrial
          cooling systems using reclaimed municipal wastewater, Water Sci. Technol., 20,
          163-1 74.
            Baron,  C.,  Equihua,  L.O.  and  Mestre,  J.P.  (2000). B.O.O.  case:  water
          management project for the use of reclaimed wastewater and desalted seawater
          for the Antonio Dovali Jaime refinery, Salina Cruz, Oaxaca, Mexico. Water Sci.
          Technol., 24,29-36.
            Blackson, D.E. and Moreland, J.L.  (1998). Wastewater reclamation and reuse
          for cooling towers at the Palo Verde nuclear generating station. In Asano, T.
          (ed.)  Wastewater  reclamation  and  reuse.  Technomic,  Lancaster,  Basel,  pp.
          1143-1 162.
            Burger, R.  (19 79). Cooling tower technology: maintenance, upgrading  and
          rebuilding. Cooling Tower Institute, Houston,  TX.
            Crook, J.,  Okum, D.A.,  Pincince, A.B.  and  McKee,  I.  (1994). Water  reuse,
          Project no. 92-WRE-1. Water Environment Research Foundation.
            Dyson, M.  (2001). How can colloidal silica and TOC  reduction increase the
          lifecycle ofpower stations? Power, November, 41-46.
            Glen,  N. (2002). Industrial water reuse experience at Grangemouth. Proc. 2nd
          International  Conference  on  Industrial  Wastewater  Recovery  and  Reuse
          (IWRR2). Cranfield, pp. 1-12.
            Kemmer. F.N. (1988). The Nalco water handbook. McGraw-Hill. New York.
            Knighton, J. (2002). Personnel communication. Raytheon Corporation.
            Levine, A.D.,  McLaughlin, M.R., Rose, J.B.,  Chivukula, V. and Harwood, VJ.
          (2002). Factors influencing pathogen removal in wastewater reclamation and
          reuse facilities. Disinfection 2002, Water Environment Federation, paper 5B.
            Piller, D. and Coupe, D. (2001). Cooling water: environmental and economic
          benefits  from  using  a  yellow  metal  corrosion  inhibitor.  Ultrapure  Water,
          November, 33-40.
            Powicki, C.R.  (2002). The water imperative: quantifying the relations. EPRI
          Journal,  July.
   120   121   122   123   124   125   126   127   128   129   130