Page 115 - Modern Control of DC-Based Power Systems

Small-Signal Analysis of Cascaded Systems 79

REFERENCES
[1] A.M. Rahimi, A. Emadi, An analytical investigation of DC/DC power electronic
converters with constant power loads in vehicular power systems, IEEE Trans.
Vehicul. Technol. 58 (6) (July 2009) 2689 2702.
[2] L. Zhu, M. Cupelli, H. Xin, A. Monti, A discussion on the possible overestimation
of the adverse effect of constant power loads on system stability, in Proceedings of
“The 5th International Conference on Grand Challenges in Modeling and
Simulation (GCMS 2012).” Sponsored by the Society for Modeling and Simulation
International (SCS) in cooperation with ACM SIGSIM. Genoa, Italy. ISBN 978-1-
61839-983-0, Simulation Series, vol. 44, no 11, pp. 37 43. July 8 11, 2012.
[3] C.H. Rivetta, A. Emadi, G.A. Williamson, R. Jayabalan, B. Fahimi, Analysis and
control of a buck DC-DC converter operating with constant power load in sea
and undersea vehicles, IEEE Trans. Ind. Applicat. 42 (2) (March April 2006)
559 572.
[4] W. Du, J. Zhang, Y. Zhang, Z. Qian, F. Peng, Large signal stability analysis based on
gyrator model with constant power load. 2011 IEEE Power and Energy Society
General Meeting, pp. 1 8, July 24 29, 2011.
[5] K. Seyoung, S.S. Williamson, Negative impedance instability compensation in more
electric aircraft DC power systems using state space pole placement control, 2011
IEEE Vehicle Power and Propulsion Conference (VPPC), pp. 1 6, September 6 9,
2011.
[6] A.K. AlShanfari, J. Wang, Influence of control bandwidth on stability of permanent
magnet brushless motor drive for “more electric” aircraft systems, 2011 International
Conference on Electrical Machines and Systems (ICEMS), pp. 1 7, 20 23 Aug.
2011.
[7] A.P.N. Tahim, D.J. Pagano, M.L. Heldwein, E. Ponce, Control of interconnected
power electronic converters in dc distribution systems, 2011 Brazilian Power
Electronics Conference (COBEP), pp. 269 274, September 11 15, 2011.
[8] Z. Liu, J. Liu, W. Bao, Y. Zhao, F. Liu, A novel stability criterion of AC power sys-
tem with constant power load, 2012 Twenty-Seventh Annual IEEE Applied Power
Electronics Conference and Exposition (APEC), pp. 1946 1950, February 5 9,
2012.
[9] P. Magne, B. Nahid-Mobarakeh, S. Pierfederici, A design method for a fault-tolerant
multi-agent stabilizing system for DC microgrids with Constant Power Loads, 2012
IEEE Transportation Electrification Conference and Expo (ITEC), pp. 1 6, June
18 20, 2012.
[10] W. Du, J. Zhang, Y. Zhang, Z. Qian, Stability criterion for cascaded system with
constant power load, IEEE Trans. Power Electr. 28 (4) (April 2013) 1843 1851.
[11] R.W. Erickson, D. Maksimović, Fundamentals of Power Electronics, 2nd ed.,
Kluwer Academic, Norwell, MA, 2001.
[12] R.D. Middlebrook, S. Cuk, A general unified approach to modelling switching-
converter power stages, Int. J. Electr. 42 (6) (Jun. 1977) 521 550.
[13] A. Ioinovici, Power Electronics and Energy Conversion Systems, John Wiley &
Sons, Chichester, West Sussex ; Hoboken, 2012.
[14] S. Skogestad, I. Postlethwaite, Multivariable Feedback Control: Analysis and Design,
2nd ed., Wiley, Chichester, 2005.
[15] T. Suntio, Dynamic Profile of Switched-Mode Converter, Wiley, Chichester, 2009.
[16] R. Ahmadi, M. Ferdowsi, Controller design method for a cascaded converter system
comprised of two DC-DC converters considering the effects of mutual interactions,
2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and
Exposition (APEC), pp. 1838 1844, February 5 9, 2012.