Page 179 - Modern Control of DC-Based Power Systems
P. 179
Control Approaches for Parallel Source Converter Systems 143
Figure 5.19 Current I&I cascaded Ideal CPL Step 10.3 - 17.8 MW.
Figure 5.20 ISPS V bus I&I for ideal CPL Step 30.9 - 53.4 MW.
been performed at t 5 0.25 s. The coefficients of the droop controllers
were chosen to obtain an even current sharing among the converters. All
converters equally share the total load power between them.
The effect of the increasing and decreasing of the CPL load on the
load voltage is described in Fig. 5.20, demonstrating that the voltage
remains stable and reaches the voltage set-points that are gradually modi-
fied by the action of the droop control. In Fig. 5.21 one can observe the
transient for the current.
