Page 162 - Multifunctional Photocatalytic Materials for Energy

148 Multifunctional Photocatalytic Materials for Energy

[49] C.K. Chua, M. Pumera, Chemical reduction of graphene oxide: a synthetic chemistry
viewpoint, Chem. Soc. Rev. 43 (1) (2014) 291–312.
[50] T. Kuila, et al., Recent advances in the efficient reduction of graphene oxide and its
application as energy storage electrode materials, Nanoscale 5 (1) (2013) 52–71.
[51] G. Eda, M. Chhowalla, Chemically derived graphene oxide: towards large-area thin-film
electronics and optoelectronics, Adv. Mater. 22 (22) (2010) 2392–2415.
[52] Q. He, et al., Transparent, flexible, all-reduced graphene oxide thin film transistors, ACS
Nano 5 (6) (2011) 5038–5044.
[53] I. Jung, et al., Tunable electrical conductivity of individual graphene oxide sheets re-
duced at “low” temperatures, Nano Lett. 8 (12) (2008) 4283–4287.
[54] M. Khan, et al., Graphene based metal and metal oxide nanocomposites: synthesis,
properties and their applications, J. Mater. Chem. A 3 (37) (2015) 18753–18808.
[55] B. Luo, L. Zhi, Design and construction of three dimensional graphene-based compos-
ites for lithium ion battery applications, Energy Environ. Sci. 8 (2) (2015) 456–477.
[56] F. Gong, H. Wang, Z.-S. Wang, Self-assembled monolayer of graphene/Pt as counter
electrode for efficient dye-sensitized solar cell, Phys. Chem. Chem. Phys. 13 (39) (2011)
17676–17682.
[57] Y. Zhu, et al., Rational design of hybrid graphene films for high-performance transpar-
ent electrodes, ACS Nano 5 (8) (2011) 6472–6479.
[58] Z. Yin, et al., Electrochemical deposition of ZnO nanorods on transparent reduced
graphene oxide electrodes for hybrid solar cells, Small 6 (2) (2010) 307–312.
[59] T. Lin, et al., A facile preparation route for boron-doped graphene, and its CdTe solar
cell application, Energy Environ. Sci. 4 (3) (2011) 862–865.
[60] S. Li, et al., Vertically aligned carbon nanotubes grown on graphene paper as electrodes
in lithium-ion batteries and dye-sensitized solar cells, Adv. Energy Mater. 1 (4) (2011)
486–490.
[61] Z. Liu, et al., Organic photovoltaic devices based on a novel acceptor material: graphene,
Adv. Mater. 20 (20) (2008) 3924–3930.
[62] N. Yang, et al., Two-dimensional graphene bridges enhanced photoinduced charge
transport in dye-sensitized solar cells, ACS Nano 4 (2) (2010) 887–894.
[63] J. Kim, V.C. Tung, J. Huang, Water processable graphene oxide: single walled carbon
nanotube composite as anode modifier for polymer solar cells, Adv. Energy Mater. 1 (6)
(2011) 1052–1057.
[64] S.W. Tong, et al., Graphene intermediate layer in tandem organic photovoltaic cells,
Adv. Funct. Mater. 21 (23) (2011) 4430–4435.
[65] J. Liu, et al., Hole and electron extraction layers based on graphene oxide deriva-
tives for high-performance bulk heterojunction solar cells, Adv. Mater. 24 (17) (2012)
2228–2233.
[66] V.C. Tung, J. Kim, J. Huang, Graphene oxide: single-walled carbon nanotube-based
interfacial layer for all-solution-processed multijunction solar cells in both regular and
inverted geometries, Adv. Energy Mater. 2 (3) (2012) 299–303.
[67] B. O'Regan, M. Grätzeli, kk required to produce one charge-carrier pair, E,(in eV),
Nature 353 (1991) 24.
[68] U. Bach, et al., Solid-state dye-sensitized mesoporous TiO2 solar cells with high
photon-to-electron conversion efficiencies, Nature 395 (6702) (1998) 583–585.
[69] H. Park, et al., Flexible graphene electrode-based organic photovoltaics with record-high
efficiency, Nano Lett. 14 (9) (2014) 5148–5154.
[70] Z. Wu, et al., Efficient planar heterojunction perovskite solar cells employing graphene
oxide as hole conductor, Nanoscale 6 (18) (2014) 10505–10510.