Page 331 - Planning and Design of Airports

Structural Design of Airport Pavements 289

5. Kawa, Brill, Hayhoe, FAARFIELD—New FAA Airport Thickness Design Software,
manuscript presenting for the 2007 FAA Worldwide Airport Technology
Transfer Conference, Atlantic City, N.J., April 2007.
6. “A Design Procedure for Continuously Reinforced Concrete Pavements for
Highways,” ACI Subcommittee VII, Title No. 69-32, Vol. 69, pp. 309–319, Journal
of the American Concrete Institute, Detroit, Mich., 1972.
7. Aerodrome Design Manual, Part 3, Pavements, Document No. 9157-AN/901, 2d
ed., International Civil Aviation Organization, Montreal, Canada, 1983.
8. Aerodromes, Annex 14 to the Convention on International Civil Aviation, Vol. 1,
Aerodrome Design and Operations, International Civil Aviation Organization,
Montreal, Canada, 1990.
9. Aerodromes, Annex 14 to the Convention on International Civil Aviation,
Vol. 2, Heliports, International Civil Aviation Organization, Montreal,
Canada, 1990.
10. Aircraft Loading on Airport Pavements, ACN-PCN, Aircraft Classification Numbers
for Commercial Turbojet Aircraft, Aerospace Industries Association of America,
Inc., Washington, D.C., 1983.
11. “Aircraft Pavement Loading: Static and Dynamic,” R. C. O’Massey, Research
in Airport Pavements, Special Report No. 175, Transportation Research Board,
Washington, D.C., 1978.
12. Airfield Pavement Requirements for Multi-Wheel Heavy Gear Loads, Report No.
FAA-RD-70-77, Federal Aviation Administration, Washington, D.C., 1971.
13. Airport Design, Advisory Circular AC 150/5300-13, Federal Aviation
Administration, Washington, D.C., 1989.
14. “Analysis of Stresses in Concrete Pavements due to Variations of Temperature,”
H. M. Westergaard, Proceedings, 6th Annual Meeting, Highway Research
Board, Washington, D.C.
15. “Applications of the Results of Research to the Structural Design of Pavements,”
E. F. Kelley, Journal of the American Concrete Institute, Detroit, Mich., 1939.
16. “Characterization of Subgrade Soils in Cold Regions for Pavement Design
Purposes,” A. T. Bergan and C. L. Monismith, Highway Research Record, No.
431, Highway Research Board, Washington, D.C., 1973.
17. Computer Aided Design for Flexible Airfield Pavements, Computer Program FAD
(FAA Version F806FAA), U.S. Army Corps of Engineers, Waterways Experiment
Station, Vicksburg, Miss., 1992.
18. Computer Aided Design for Rigid Airfield Pavements, Computer Program RAD
(FAA Version R805FAA), U.S. Army Corps of Engineers, Waterways Experiment
Station, Vicksburg, Miss., 1992.
19. Computer Aided Evaluation for Airfield Pavements, Computer Program PCN, U.S.
Army Corps of Engineers, Waterways Experiment Station, Vicksburg, Miss.,
1992.
20. Computer Program for Airport Pavement Design, R. G. Packard, Portland Cement
Association, Skokie, Ill., 1967.
21. Computer Program Supplement to Thickness Design Asphalt Pavements for Air
Carrier Airports, Manual Series, No. MS-11A, The Asphalt Institute, Lexington,
Ky., 1987.
22. Design and Construction and Behavior under Traffic of Pavement Test Sections,
Report No. FAA-RD-73-198-I, Federal Aviation Administration, Washington,
D.C., 1974.
23. Design and Construction, Continuously Reinforced Joint and Crack Sealing Materials
and Practices, NCHRP Report, Report No. 38, National Cooperative Highway
Research Program, Highway Research Board, Washington, D.C., 1967.
24. Design and Construction of Airport Pavements on Expansive Soils, Report No.
FAA-RD-76-66, Federal Aviation Administration, Washington, D.C., 1976.
25. Design and Construction of MESL, Report No. FAA-RD-73-198-III, Federal
Aviation Administration, Washington, D.C., 1974.
26. “Design Considerations for Multi Wheel Aircraft,” W. R. Barker and C. R.
Gonzalez, International Air Transportation, Proceedings of the 22nd Conference
on International Air Transportation, American Society of Civil Engineers, New
York, N.Y., 1992.