Page 42 - Polymer-based Nanocomposites for Energy and Environmental Applications

Introduction of polymer-based nanocomposites 21

[46] Glinel K, D’ejugnat C, Prevot M, Scholer B, Schonhoff M, Klitzing RV. Responsive
polyelectrolyte multilayers. Colloids Surf A Physicochem Eng Asp 2007;303:3–13.
[47] Rubber Chemistry. Matador Rubber S.R.O; 2007.
[48] Khare R, Bose S. Carbon nanotube based composites—a review. J Miner Mater Charact
Eng 2005;4(1):31–46.
[49] Bal S, Samal SS. Carbon nanotube reinforced polymer composites—a state of the art.
Bull Mater Sci 2007;30(4):379–86.
[50] Ji T, Feng Y, Qin M, Feng W. Thermal conducting properties of aligned carbon nan-
otubes and their polymer composites. Compos Part A 2016;91:351. https://doi.org/
10.1016/j.compositesa.2016.10.009.
[51] Moshiul Alam AKM, Beg MDH, Yunus RM, Mina MF, Maria KH, Mieno T. Evolution
of functionalized multi-walled carbon nanotubes by dendritic polymer coating and their
anti-scavenging behavior during curing process. Mater Lett 2016;167:58–60.
[52] Chen J, Cui X, Zhu Y, Jiang W, Sui K. Design of superior conductive polymer composite
with precisely controlling carbon nanotubes at the interface of a co-continuous polymer
blend via a balance of π-π interactions and dipole-dipole interactions. Carbon
2017;114:441–8.
[53] Hu Z, Shao Q, Xu X, Zhang D, Huang Y. Surface initiated grafting of polymer chains on
carbon nanotubes via one-step cycloaddition of diarylcarbene. Compos Sci Technol
2017;142:294–301.
[54] Hooshmand Zaferani S. Using silane products on fabrication of polymer-based
nanocomposite for thin film thermoelectric devices. Renew Sust Energ Rev
2017;71:359–64.
[55] Liu P, Han J, Jiang L, Li Z, Cheng J. Polyaniline/multi-walled carbon nanotubes com-
posite with core-shell structures as a cathode material for rechargeable lithium-polymer
cells. Appl Surf Sci 2017;400:446–52. https://doi.org/10.1016/j.apsusc.2016.12.119.
[56] Peng Y, Wang K, Yu M, Li A, Bordia RK. An optimized process for in situ formation of
multi-walled carbon nanotubes in templated pores of polymer-derived silicon
oxycarbide. Ceram Int 2017;43:3854–60.
[57] Tarfaoui M, Lafdi K, El Moumen A. Mechanical properties of carbon nanotubes based
polymer composites. Compos Part B 2016;103:113–21.
[58] Wohlleben W. Nanorelease: pilot interlaboratory comparison of a weathering protocol
applied to resilient and labile polymers with and without embedded carbon nanotubes.
Carbon 2017;113:346–60.
[59] El Moumen A, Tarfaoui M, Lafdi K. Mechanical characterization of carbon nanotubes
based polymer composites using indentation tests. Compos Part B 2017;114:1–7.
[60] Kim S, Kissick J, Spence S, Boyle C. Design, analysis and performance of a polymer-
carbon nanotubes based economic solar collector. Sol Energy 2016;134:251–63.
[61] Ovid’ko IA. Enhanced mechanical properties of polymer-matrix nanocomposites
reinforced by graphene inclusions: a review. Rev Adv Mater Sci 2013;34:19–25.
[62] Nezakati T, Tan A, Seifalian AM. Enhancing the electrical conductivity of a hybridPOSS-
PCL/grapheme nanocomposite polymer. J Colloid Interface Sci 2014;435:145–55.
[63] Noorunnisa Khanam P, Ponnamma D, AL-Madeed MA. Electrical properties of
graphene polymer nanocomposites. Springer series on polymer and composite materials,
Switzerland: Springer International Publishing; 2015.
[64] Galpaya D, Wang M, Liu M, Motta N, Waclawik E, Yan C. Recent advances in fabrication
and characterization of graphene-polymer nanocomposites. Graphene 2012;1:30–49.
[65] Potts JR, Dreyer DR, Bielawski CW, Ruoff RS. Graphene-based polymer
nanocomposites. Polymer 2011;52:5–25.