Page 29 - Power Quality in Electrical Systems

12 Chapter One

References

[1.1] J. M. Clemmensen and R. J. Ferraro, “The Emerging Problem of Electric Power
Quality,” Public Utilities Fortnightly, November 28, 1985.
[1.2] J. G. Dougherty and W. L. Stebbins, “Power Quality: A Utility and Industry
Perspective,” Proceedings of the IEEE 1997 Annual Textile, Fiber and Film Industry
Technical Conference, May 6–8, 1997, pp. 1–10.
[1.3] Dranetz-BMI, The Dranetz-BMI Field Handbook for Power Quality Analysis,
Dranetz-BMI, 1998.
[1.4] R. C. Dugan, M. F. McGranaghan, S. Santoso, and H. W. Beaty, Electrical Power
Systems Quality, McGraw-Hill, 2003.
[1.5] R. A. Flores, “State of the Art in the Classification of Power Quality Events, an
Overview,” Proceedings of the 2002 10th International Conference on Harmonics and
Quality of Power, pp. 17–20.
[1.6] G. T. Heydt, “Electric Power Quality: A Tutorial Introduction,” IEEE Computer
Applications in Power, vol. 11, no. 1, January 1998, pp. 15–19.
[1.7] M. A. Golkar, “Electric Power Quality: Types and Measurements,” 2004 IEEE
International Conference on Electric Utility Deregulation, Restructuring and Power
Technologies (DRPT2004), April 2004, Hong Kong, pp. 317–321.
[1.8] T. E. Grebe, “Power Quality and the Utility/Customer Interface,” SOUTHCON ’94
Conference Record, March 29–31, 1994, pp. 372–377.
[1.9] T. Ise, Y. Hayashi, and K. Tsuji, “Definitions of Power Quality Levels and the
Simplest Approach for Unbundled Power Quality Services,” Proceedings of the
Ninth International Conference on Harmonics and Quality of Power, October 1–4,
2000, pp. 385–390.
[1.10] B. Kennedy, Power Quality Primer, McGraw-Hill, 2000.
[1.11] S. D. MacGregor, “An Overview of Power Quality Issues and Solutions,” Proceedings
of the 1998 IEEE Cement Industry Conference, May 17–21, 1998, pp. 57–64.
[1.12] F. D. Martzloff and T. M. Gruzs, “Power Quality Site Surveys: Facts, Fiction and
Fallacies,” IEEE Transactions on Industry Applications, vol. 24, no. 6,
November/December 1988.
[1.13] J. Seymour and T. Horsley, “The Seven Types of Power Problems,” APC Whitepaper
#18. Available on the Web at http://www.apcmedia.com/salestools/VAVR-
5WKLPK_R0_EN.pdf.
[1.14] J. Stones and A. Collinson, “Power Quality,” Power Engineering Journal, April,
2001, pp. 58–64
[1.15] IEEE, “Interharmonics in Power Systems,” IEEE Interharmonic Task Force. Available
on the Web at http://grouper.ieee.org/groups/harmonic/iharm/docs/ihfinal.pdf.
[1.16] Y. Yacamini, “Power Systems Harmonics—Part 1: Harmonic Sources,” Power
Engineering Journal, August 1994, pp. 193–198.
[1.17] ____, “Power Systems Harmonics—Part 3: Problems Caused by Distorted Supplies,”
Power Engineering Journal, October 1995, pp. 233–238.
[1.18] C. K. Duffey and R. P. Stratford “Update of Harmonic Standard IEEE-519: IEEE
Recommended Practices and Requirements for Harmonic Control in Electric Power
Systems,” IEEE Transactions on Industry Applications, vol. 25, no. 6, November/
December 1989, pp. 1025–1034.
[1.19] T. Hoevenaars, K. LeDoux, and M. Colosino, “Interpreting IEEE Std. 519 and
Meeting its Harmonic Limits in VFD Applications,” Proceedings of the IEEE
Industry Applications Society 50th Annual Petroleum and Chemical Industry
Conference, September 15–17, 2003, pp. 145–150.
[1.20] IEEE, “IEEE Recommended Practice for Emergency and Standby Power Systems for
Industrial and Commercial Applications,” (The Orange Book), IEEE Std. 446-1995
[1.21] ____, “IEEE Recommended Practices and Requirements for Harmonic Control in
Electrical Power Systems,” IEEE Std. 519-1992, revision of IEEE Std. 519-1981.
[1.22] ____, “IEEE Recommended Practice for Powering and Grounding Sensitive
Electronic Equipment,” IEEE Std. 1100-1992 (Emerald Book).
[1.23] ____, “IEEE Recommended Practice for Monitoring Electric Power Quality,” IEEE
Std. 1159-1995.