Page 30 - Power Quality in Electrical Systems

Introduction 13

[1.24] ____, “IEEE Guide for Service to Equipment Sensitive to Momentary Voltage
Disturbances,” IEEE Std. 1250-1995.
[1.25] ____, “IEEE Recommended Practice for Evaluating Electric Power System
Compatibility with Electronic Process Equipment,” IEEE Std. 1346-1998.
[1.26] IEEE, “IEEE Recommended Practice for Measurement and Limits of Voltage
Fluctuations and Associated Light Flicker on AC Power Systems,” IEEE Std.
1453-2004.
[1.27] M. E. Baran, J. Maclaga, A. W. Kelley, and K. Craven, “Effects of Power
Disturbances on Computer Systems,” IEEE Transactions on Power Delivery, vol. 13,
no. 4, October 1998, pp. 1309–1315.
[1.28] K. Johnson and R. Zavadil, “Assessing the Impacts of Nonlinear Loads on Power
Quality in Commercial Buildings—An Overview,” Conference Record of the 1991
IEEE Industry Applications Society Annual Meeting, September 28–October 4,
1991, pp. 1863–1869.
[1.29] V. E. Wagner, “Effects of Harmonics on Equipment,” IEEE Transactions on Power
Delivery, vol. 8, no. 2, April 1993, pp. 672–680.
[1.30] Siemens, “Harmonic Distortion Damages Equipment and Creates a Host of Other
Problems.” Whitepaper available on the Web at http://www.sbt.siemens.com/HVP/
Components/Documentation/SI033WhitePaper.pdf.
[1.31] ICNIRP, “Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic
and Electromagnetic Fields (Up to 300 MHz),” International Commission on Non-
Ionizing Radiation Protection.
[1.32] R. Redl and A. S. Kislovski, “Telecom Power Supplies and Power Quality,”
Proceedings of the 17th International Telecommunications Energy Conference,
INTELEC ’95, October 29–November 1, 1995, pp. 13–21.
[1.33] K. Armstrong, “Filters,” Conformity, 2004, pp. 126–133.
[1.34] ____, “Spotlight on Filters,” Conformity, July 2003, pp. 28–32.
[1.35] ANSI, “American National Standard Guide on the Application and Evaluation of
EMI Power-Line Filters for Commercial Use,” ANSI C63.13 1991.
[1.36] Astec, Inc., “EMI Suppression,” Application note 1821, November 12, 1998.
[1.37] J. R. Barnes, “Designing Electronic Systems for ESD Immunity,” Conformity,
February 2003, pp. 18–27.
[1.38] H. Chung, S. Y. R. Hui, and K. K. Tse, “Reduction of Power Converter EMI Emission
Using Soft-Switching Technique,” IEEE Transactions on Electromagnetic
Compatibility, vol. 40, no. 3, August 1998, pp. 282–287.
[1.39] T. Curatolo and S. Cogger, “Enhancing a Power Supply to Ensure EMI Compliance,”
EDN, February 17, 2005, pp. 67–74.
[1.40] CEI/IEC 1000-2-1: 1990, “Electromagnetic Compatibility,” 1st ed, 1990.
[1.41] IEEE, “Interharmonics in Power Systems,” IEEE Interharmonics Task Force,
December 1, 1997.
[1.42] ____, IEEE 100 The Authoritative Dictionary of IEEE Standard Terms, Standards
Information Network, IEEE Press.
[1.43] D. G. Fink and H. W. Beaty, eds., Standard Handbook for Electrical Engineers,
McGraw-Hill, 1999.
[1.44] M. F. Alves and T. N. Ribeiro, “Voltage Sag: An Overview of IEC and IEEE
Standards and Application Criteria,” Proceedings of the 1999 IEEE Transmission
and Distribution Conference, April 11–16, 1999, pp. 585–589.
[1.45] M. Bollen, “Voltage Sags: Effects, Prediction and Mitigation,” Power Engineering
Journal, June 1996, pp. 129–135.
[1.46] M. S. Daniel, “A 35-kV System Voltage Sag Improvement,” IEEE Transactions on
Power Delivery, vol. 19, no. 1, January 2004, pp. 261–265.
[1.47] S. Djokic, J. Desmet, G. Vanalme, J. V. Milanovic, and K. Stockman, “Sensitivity
of Personal Computers to Voltage Sags and Short Interruptions,” IEEE Transactions
on Power Delivery, vol. 20, no. 1, January 2005, pp. 375–383.
[1.48] K. J. Kornick, and H. Q. Li, “Power Quality and Voltage Dips: Problems,
Requirements, Responsibilities,” Proceedings of the 5th International Conference
on Advances in Power System Control, Operation and Management, APSCOM
2000, Hong Kong, October 2000, pp. 149–156.