Page 170 - Characterization and Properties of Petroleum Fractions - M.R. Riazi

QC: IML/FFX
P2: IML/FFX
P1: IML/FFX
AT029-Manual-v7.cls
AT029-Manual
June 22, 2007
AT029-03
150 CHARACTERIZATION AND PROPERTIES OF PETROLEUM FRACTIONS
Chemical Engineering, Pennsylvania State University,
Approximating Critical and Thermal Properties of Petroleum
University Park, PA, 1979. T1: IML 14:23 [50] Watson, K. M. and Nelson, E. F., “Improved Methods for
[30] Van Nes, K. and Van Western, H. A., Aspects of the Constitution Fractions,” Industrial and Engineering Chemistry, Vol. 25, 1933,
of Mineral Oils, Elsevier, New York, 1951. pp. 880–887.
[31] Riazi, M. R., “Distribution Model for Properties of [51] Watson, K. M., Nelson, E. F., and Murphy, G. B.,
Hydrocarbon-Plus Fractions,” Industrial and Engineering “Characterization of Petroleum Fractions,” Industrial and
Chemistry Research, Vol. 28, 1989, pp. 1731–1735. Engineering Chemistry, Vol. 27, 1935, pp. 1460–1464.
[32] Riazi, M. R. and Daubert, T. E., “Improved Characterization of [52] Kurtz, Jr., S. S. and Ward, A. L., “The Refractivity Intercept and
Wide Boiling Range Undefined Petroleum Fractions,” Industrial the Specific Refraction Equation of Newton, I: Development of
and Engineering Chemistry Research, Vol. 26, 1987, pp. 629–632. the Refractivity Intercept and Composition with Specific
[33] Huang, P. K. and Daubert, T. E., “Prediction of the Enthalpy of Refraction Equations,” Journal of Franklin Institute, Vol. 222,
Petroleum Fractions: Pseudocompound Method,” Industrial 1936, pp. 563–592.
and Engineering Chemistry, Process Design and Development, [53] Huang, P. K., Characterization and Thermodynamic Correlations
Vol. 13, No. 4, 1974, pp. 359–362. for Undefined Hydrocarbon Mixtures, Ph.D. Dissertation,
[34] Katinas, T. G., Prediction of the Viscosities of Petroleum Pennsylvania State University, University Park, PA, 1977.
Fractions, M. Sc. Thesis, Department of Chemical Engineering, [54] Fryback, M. G., “Synthetic Fuels: Promises and Problems,”
Pennsylvania State University, University Park, PA, Chemical Engineering Progress, Vol. 77, No. 5, 1981,
1977. pp. 39–43.
[35] Miqueu, C., Satherley, J., Mendiboure, B., Lachaise, J. and [55] Hersh, R. E., Fenske, M. R., Booser, E. R., and Koch, E. F.,
Graciaa, A., “The Effect of P/N/A Distribution on the Parachors “Ring Analysis of Hydrocarbon Mixtures,” Journal of Institute
of Petroleum Fractions,” Fluid Phase Equilibria, Vol. 180, of Petroleum, Vol. 36, No. 322, 1950, pp. 624–668.
No.1/2, 2001, pp. 327–344. [56] API Research Project 42: Properties of Hydrocarbons of High
[36] Riazi, M. R. and Daubert, T. E., “Prediction of Molecular Type Molecular Weight, American Petroleum Institute, New York,
Analysis of Petroleum Fractions and Coal Liquids,” Industrial 1966.
and Engineering Chemistry, Process Design and Development, [57] Goodger, E. and Vere, R., Aviation Fuels Technology, MacMillan,
Vol. 25, No. 4, 1986, pp. 1009–1015. London, 1985.
[37] Riazi, M. R. and Al-Sahhaf, T., “Physical Properties of n-Alkanes [58] Goossens, A. G., “Prediction of the Hydrogen Content of
and n-Alkyl Hydrocarbons: Application to Petroleum Mixtures,” Petroleum Fractions,” Industrial and Engineering Chemistry
Industrial and Engineering Chemistry Research, Vol. 34, 1995, Research, Vol. 36, 1997, pp. 2500–2504.
pp. 4145–4148. [59] Jenkins, G. I. and Walsh, R. P., “Quick Measure of Jet Fuel
[38] Riazi, M. R. and Daubert, T. E., “Simplify Property Predictions,” Properties,” Hydrocarbon Processing, Vol. 47, No. 5, 1968,
Hydrocarbon Processing, Vol. 59, No. 3, 1980, pp. 115–116. pp. 161–164.
[39] Lee, B. I. and Kesler, M. G., “A Generalized Thermodynamic [60] Fein, R. S., Wilson, H. I., and Sherman, J., “Net Heat of
Correlation Based on Three- Parameter Corresponding States,” Combustion of Petroleum Fractions,” Industrial and
American Institute of Chemical Engineers Journal, Vol. 21, 1975, Engineering Chemistry, Vol. 45, No. 3, 1953, pp. 610–614.
pp. 510–527. [61] Baird, C. T., Crude Oil Yields and Product Properties, Ch. De la
[40] Kesler, M. G. and Lee, B. I., “Improve Prediction of Enthalpy of Haute–Belotte 6, Cud Thomas Baird IV, 1222 Vezenaz, Geneva,
Fractions,” Hydrocarbon Processing, Vol. 55, No. 3, March 1976, Switzerland, June, 1981.
pp. 153–158. [62] Riazi, M. R., Nasimi, N., and Roomi, Y., “Estimating Sulfur
[41] Winn, F. W., “Physical Properties by Nomogram,” Petroleum Content of Petroleum Products and Crude Oils,” Industrial and
Refiners, Vol. 36, No. 21, 1957, pp. 157–159. Engineering Chemistry Research, Vol. 38, No. 11, 1999,
[42] Twu, C. H., “An Internally Consistent Correlation for Predicting pp. 4507–4512.
the Critical Properties and Molecular Weights of Petroleum [63] Gary, J. H. and Handwerk, G. E., Petroleum Refining, Technology --`,```,`,``````,`,````,```,,-`-`,,`,,`,`,,`---
and Coal-Tar Liquids,” Fluid Phase Equilbria, Vol. 16, 1984, and Economic, 3rd ed., Marcel Dekker, New York, 1994.
pp. 137–150. [64] Hebert, J., “Court Upholds Tougher Diesel Rules,” Associated
[43] Goossens, A. G., “Prediction of Molecular Weight of Petroleum Press Writer, Yahoo News Website, May 3, 2002.
Fractions,” Industrial and Engineering Chemistry Research, Vol. [65] Ball, S. J., Whisman, M. L., and Wenger, W. J., “Nitrogen
35, 1996, pp. 985–988. Content of Crude Petroleums,” Industrial and Engineering
[44] Riazi, M. R. and Daubert, T. E., “Characterization Parameters Chemistry, Vol. 43, No. 11, 1951, pp. 2577–2581.
for Petroleum Fractions,” Industrial and Engineering [66] Nelson, W. L., Petroleum Refinery Engineering, 4th ed.,
Chemistry Research, Vol. 26, 1987, pp. 755–759. (Corrections, McGraw-Hill, New York, 1969.
p. 1268.) [67] Riazi, M. R., Albahri, T. A., and Alqattan, A., “Prediction of Reid
[45] Riazi, M. R. and Roomi, Y., “Use of the Refractive Index in the Vapor Pressure of Petroleum Fuels,” Petroleum Science and
Estimation of Thermophysical Properties of Hydrocarbons and Technology, Vol. 23, No. 1, 2005, pp. 75–86.
Their Mixtures,” Industrial and Engineering Chemistry [68] Albahri, T., Riazi, M. R., and Alqattan, A., “Analysis of Quality
Research, Vol. 40, No. 8, 2001, pp. 1975–1984. of the Petroleum Fuels,” Journal of Energy and Fuels, Vol. 17,
[46] Oil and Gas Journal Data Book, 2000 Edition, PennWell, Tulsa, No. 3, 2003, pp. 689–693.
OK, 2000. [69] Hatzioznnidis, I., Voutsas, E. C., Lois, E., and Tassios, D. P.,
[47] Riazi, M. R. and Daubert, T. E., “Prediction of the Composition “Measurement and Prediction of Reid Vapor Pressure of
of Petroleum Fractions,” Industrial and Engineering Chemistry, Gasoline in the Presence of Additives,” Journal of Chemical and
Process Design and Development, Vol. 19, No. 2, 1980, Engineering Data, Vol. 43, No. 3, 1998, pp. 386–392.
pp. 289–294. [70] Butler, R. M., Cooke, G. M., Lukk, G. G., and Jameson, B. G.,
[48] Ahmed, T., Hydrocarbon Phase Behavior, Gulf Publishing, “Prediction of Flash Points of Middle Distillates,” Industrial
Houston, TX, 1989. and Engineering Chemistry, Vol. 48, No. 4, 1956, pp. 808– 812.
[49] Hill, J. B. and Coats, H. B., “The Viscosity Gravity Constant of [71] Walsh, R. P. and Mortimer, J. V., “New Way to Test Product
Petroleum Lubricating Oils,” Industrial and Engineering Quality,” Hydrocarbon Processing, Vol. 50, No. 9, 1971,
Chemistry, Vol. 20, 1928, pp. 641–644. pp. 153–158.

Copyright ASTM International
Provided by IHS Markit under license with ASTM Licensee=International Dealers Demo/2222333001, User=Anggiansah, Erick
No reproduction or networking permitted without license from IHS Not for Resale, 08/26/2021 21:56:35 MDT