Page 215 - Characterization and Properties of Petroleum Fractions - M.R. Riazi

T1: IML
QC: —/—
P1: KVU/KXT
P2: KVU/KXT
AT029-Manual-v7.cls
AT029-Manual
AT029-04
June 22, 2007
4. CHARACTERIZATION OF RESERVOIR FLUIDS AND CRUDE OILS 195
[2] Hoffmann, A. E., Crump, J. S., and Hocott, C. R. P.,
Hydrocarbon-Plus Fractions,” Industrial and Engineering
“Equilibrium Constants for a Gas-Condensate System,” 21:30 [25] Riazi, M. R., “Distribution Model for Properties of
Petroleum Transactions AIME, Vol. 198, 1953, pp. 1–10. Chemistry Research, Vol. 28, 1989, pp. 1731–1735.
[3] Osjord, E. H., Ronnisgsen, H. P., and Tau, L., “Distribution of [26] Ahmed, T., Hydrocarbon Phase Behavior, Gulf Publishing,
Weight, Density, and Molecular Weight in Crude Oil Derived Houston, TX, 1989.
from Computerized Capillary GC Analysis,” Journal of High [27] Mansoori, G. A. and Chorn, L. G., “Multicomponent Fractions
Resolution Chromatography, Vol. 8, 1985, pp. 683–690. Characterization: Principles and Theories,”
[4] ASTM, Annual Book of Standards, Section Five, Petroleum C 7+ Characterization, L. G. Chorn and G. A. Mansoori,
Products, Lubricants, and Fossil Fuels (in 5 Vol.), ASTM Eds.,Taylor & Francis, New York, 1989, pp. 1–10.
International, West Conshohocken, PA, 2002. [28] Cotterman, R. L. and Prausnitz, J. M., “Flash Calculation for
[5] KISR, Private Communication, Petroleum Research Studies Continuous or Semicontinuous Mixtures Using An Equation of
Center, Kuwait Institute for Scientific Research (KISR), State,” Industrial Engineering Chemistry, Process Design and
Ahmadi, Kuwait, May 2002. Development, Vol. 24, 1985, pp. 434–443.
[6] Pedersen, K. S., Fredenslund, Aa., and Thomassen, P., Properties [29] Kehlen, H., Ratsch, M. T., and Berhmann, J., “Continuous
of Oils and Natural Gases, Gulf Publishing, Houston, TX, 1989. Thermodynamics of Multicomponent Systems,” AIChE
[7] Pan, H., Firoozabadi, A., and Fotland, P., “Pressure and Journal, Vol. 31, 1985, pp. 1136–1148.
Composition Effect on Wax Precipitation: Experimental Data [30] Ratsch, M. T. and Kehlen, H., “Continuous Thermodynamics of
and Model Results,” Society of Petroleum Engineers Production Complex Mixtures,” Fluid Phase Equilibria, Vol. 14, 1983,
and Facilities, Vol. 12, No. 4, 1997, pp. 250–258. pp. 225–234.
[8] Oil and Gas Journal Data Book, 2000 edition, PennWell, Tulsa, [31] Ratzch, M. T., Kehlen, H., and Schumann, J., “Flash
OK, 2000, pp. 295–365. Calculations for a Crude Oil by Continuous Thermodynamics,”
[9] Gary, J. H. and Handwerk, G. E., Petroleum Refining, Technology Chemical Engineering Communications, Vol. 71, 1988,
and Economic, 3rd ed., Marcel Dekker, New York, 1994. pp. 113–125.
[10] Ahmed, T., Reservoir Engineering Handbook, Gulf Publishing, [32] Wang, S. H. and Whiting, W. B., “A Comparison of Distribution --`,```,`,``````,`,````,```,,-`-`,,`,,`,`,,`---
Houston, TX, 2000. Functions for Calculation of Phase Equilibria of Continuous
[11] Standing, M. B., Volumetric and Phase Behavior of Oil Field Mixtures,” Chemical Engineering Communications, Vol. 71,
Hydrocarbon Systems, Society of Petroleum Engineers, Dallas, 1988, pp. 127–143.
TX, 1977. [33] Katz, D. L., “Overview of Phase Behavior of Oil and Gas
[12] Wichert, E. and Aziz, K., “Calculation of Z’s for Sour Gases,” Production,” Journal of Petroleum Technology, June 1983,
Hydrocarbon Processing, Vol. 51, No. 5, 1972, pp. 119–122. pp. 1205–1214.
[13] Carr, N., Kobayashi, R., and Burrows, D.,“Viscosity of [34] Yarborough, L., “Application of a Generalized Equation of
Hydrocarbon Gases Under Pressure,” Transactions of AIME, State to Petroleum Reservoir Fluids,” Paper presented at the
Vol. 201, 1954, pp. 23–25. 176th National Meeting of the American Chemical Society,
[14] Katz, D. L. and Firoozabadi, A. “Predicting Phase Behavior of Miami Beach, FL, 1978.
Condensate Crude/Oil Systems Using Methane Interaction [35] Pedersen, K. S., Thomassen, P., and Fredenslund, Aa.,
Coefficients,” Journal of Petroleum Technology, November 1978, “Thermodynamics of Petroleum Mixtures Containing Heavy
pp. 1649–1655. Hydrocarbons, 1: Phase Envelope Calculations by Use of the
[15] Whitson, C. H., “Characterizing Hydrocarbon Plus Fractions,” Soave-Redlich-Kwong Equation of State,” Industrial
Society of Petroleum Engineers Journal, August 1983, Engineering Chemisty, Process Design and Development, Vol. 23,
pp. 683–694. 1984, pp. 163–170.
[16] Riazi, M. R. and Al-Sahhaf, T. A., “Physical Properties of Heavy [36] Whitson, C. H., Anderson, T. F., and Soreide, I., “C 7+
Petroleum Fractions and Crude Oils,” Fluid Phase Equilibria, Characterization of Related Equilibrium Fluids Using the
Vol. 117, 1996, pp. 217–224. Gamma Distribution,” C 7+ Fraction Characterization,L.G.
[17] Whitson, C. H. and Brule, M. R., Phase Behavior, Monograph Chorn and G. A. Mansoori, Eds., Taylor & Francis, New York,
Volume 20, SPE, Richardson, TX, 2000. 1989, pp. 35–56.
[18] Danesh, A., PVT and Phase Behavior of Petroleum Reservoir [37] Whitson, C. H., Anderson, T. F., and Soreide, I., “Application
Fluids, Elsevier, Amsterdam, 1998. of the Gamma Distribution Model to Molecular Weight
[19] Riazi, M. R. and Daubert, T. E., “Characterization Parameters and Boiling Point Data for Petroleum Fractions,”
for Petroleum Fractions,” Industrial and Engineering Chemistry Chemical Engineering Communications, Vol. 96, 1990,
Research, Vol. 26, 1987, pp. 755–759. Corrections, p. 1268. pp. 259–278.
[20] Whitson, C. H., “Effect of C 7+ Properties on Equation-of-State [38] Abramowitz, M. and Stegun, I. A., Handbook of Mathematical
Predictions,” Society of Petroleum Engineers Journal, December Functions, Dover Publication, New York, 1970.
1984, pp. 685–696. [39] Press, W. H., Flannery, B. P., Teukolsky, S. A., and Vetterling,
[21] Chorn, L. G. and Mansoori, G. A., C 7+ Fraction W. T., Numerical Recipes, The Art of Scientific Computing,
Characterization, Taylor & Francis, New York, 1989, 235 p. Cambridge University Press, Cambridge, London, 1986,
[22] Benmekki, H. and Mansoori, G. A., “Pseudization techniques pp. 160–161.
and heavy fraction characterization with equation of state [40] Riazi, M. R., Al-Adwani, H. A., and Bishara, A., “The Impact of
models, Advances in Thermodynamics, Vol. 1: C 7+ Fraction Characterization Methods on Properties of Reservoir Fluids
Characterization, L. G. Chorn and G. A. Mansoori, Eds., Taylor and Crude Oils: Options and Restrictions,” Journal of Petroleum
& Francis, New York, 1989, pp. 57–78. Science and Engineering, Vol. 42., No. 2–4, 2004, pp. 195–207.
[23] Soreide, I., Improved Phase Behavior Predictions of Petroleum [41] Rodgers, P. A., Creagh, A. L., Prauge, M. M., and Prausnitz,
Reservoir Fluids from a Cubic Equation of State, Doctoral J. M., “Molecular Weight Distribution for Heavy Fossil Fuels
Dissertation, Norwegian Institute of Technology (NTH), from Gel-Permeation Chromatograph,,” Industrial and
Trondheim, Norway, 1989. Engineering Chemistry Research, Vol. 26, 1987, pp. 2312–
[24] Riazi, M. R. “A Distribution Model for C 7+ Fractions 2321.
Characterization of Petroleum Fluids,” Industrial and [42] Berge, O., Damp/Vaeske-Likevekter i Raoljer: Karakterisering av
Engineering Chemistry Research, Vol. 36, 1997, pp. 4299–4307. Hydrokarbonfraksjon, M.Sc. Thesis, Department of Chemical

Copyright ASTM International
Provided by IHS Markit under license with ASTM Licensee=International Dealers Demo/2222333001, User=Anggiansah, Erick
No reproduction or networking permitted without license from IHS Not for Resale, 08/26/2021 21:56:35 MDT