Page 278 - An Introduction to Microelectromechanical Systems Engineering

Summary 257

References

[1] Lau, J. H., et al., Electronic Packaging: Design, Materials, Process, and Reliability, New
York: McGraw-Hill, 1998, pp. 111–193.
[2] Beach, W. F., T. M. Austin, and R. Olson, “Parylene Coatings,” in Electronic Materials
Handbook: Volume 1, Packaging, M. L. Minges, C. A. Dostal, and M. S. Woods (eds.),
Materials Park, OH: ASM International, 1989, pp. 789–801.
[3] Monk, D. J., et al., “Media Compatible Packaging and Environmental Testing of Barrier
Coating Encapsulated Silicon Pressure Sensors,” Tech. Digest Solid-State Sensor and
Actuator Workshop, Hilton Head Island, SC, June 3–6, 1996, pp. 36–41.
[4] Flannery, A. F., et al., “PECVD Silicon Carbide for Micromachined Transducers,” Proc.
1997 Int. Conf. on Solid-State Sensors and Actuators, Vol. 1, Chicago, IL, June 16–19,
1997, pp. 217–220.
[5] Burri, M., “Calibration-Free Pressure Sensor System,” Application Note AN1097,
Motorola Sensor Device Data book, 1995.
[6] Sergent, J. E., “The Hybrid Microelectronics Technology,” in Electronic Packaging &
Interconnection Handbook, 2nd ed., C. A. Harper (ed.), New York: McGraw-Hill, 1997,
pp. 7.10–7.26.
[7] Hwang, J. S., “Solder Technologies for Electronic Packaging,” in Electronic Packaging &
Interconnection Handbook, 2nd ed., C. A. Harper (ed.), New York: McGraw-Hill, 1997,
pp. 5.4–5.20.
[8] Striny, K. M., “Assembly Techniques and Packaging of VLSI Devices,” in VLSI Technol-
ogy, 2nd ed., S. M. Sze (ed.), New York: McGraw-Hill, 1988, pp. 566-611.
[9] Dow Corning Corporation, Midland, MI 48686-0994, http://www.dowcorning.com/
html/industries/electronics/index.html.
[10] Bonding Handbook and General Catalog, Kulicke and Soffa Industries, Inc., Willow
Grove, PA, 1990.
[11] Flip Chip Technologies, J. H. Lau (ed.), New York: McGraw-Hill, 1996.
[12] Jaeggi, D., et al., “Novel Interconnection Technologies for Integrated Microfluidic Sys-
tems,” Tech. Digest Solid-State Sensor and Actuator Workshop, Hilton Head Island, SC,
June 8–11, 1998, pp. 112–115.
[13] VerLee, D., et al., “Fluid Circuit Technology: Integrated Interconnect Technology for
Miniature Fluidic Devices,” Tech. Digest Solid-State Sensor and Actuator Workshop, Hil-
ton Head Island, SC, June 3–6, 1996, pp. 9–14.
[14] Borgeson, P., and P. A. Kondos, “Packaging of Single Mode Laser Diodes,” Proc. of the
2002 ASME International Mechanical Engineering Congress and Exposition, November
17–22, 2002, New Orleans, LA, EPP-Vol. 2, pp. 471–475.
[15] Harvilchuck, L.A., et al., “Passive Optoelectronics Component Manufacturing,” Proc. of
the 2002 ASME International Mechanical Engineering Congress and Exposition, Novem-
ber 17–22, 2002, New Orleans, LA, EPP-Vol. 2, pp. 465–469.
[16] Ogura, G., “Hermetic Packaging: A Neglected ‘Holy Grail’?,” Lightwave Magazine,
October 2001.
[17] Eddy, D. S., and D. R. Sparks, “Application of MEMS Technology in Automotive Sensors
and Actuators,” in Integrated Sensors, Microactuators, & Microsystems (MEMS), K. D.
Wise (ed.), Proceedings of the IEEE, Vol. 86, No. 8, August 1998, pp. 1750–1751.
[18] U.S. Patent 5,545,912, August 13, 1996.
[19] Ginsberg, G. L., and D. P. Schnorr, Multichip Modules and Related Technologies, New
York: McGraw-Hill, 1994.
[20] Ball Grid Array Technology, J. H. Lau (ed.), New York: McGraw-Hill, 1995.
[21] NPC-107 data sheet, GE NovaSensor, 1055 Mission Court, Fremont, CA 94539,
http://www.novasensor.com.
[22] Faris, J., and T. Kocian, “DMD™ Packages—Evolution and Strategy,” TI Technical Jour-
nal, July–September 1998, pp. 87–94.