Page 279 - An Introduction to Microelectromechanical Systems Engineering

258 Packaging and Reliability Considerations for MEMS

[23] Bonner, J. K., “Surface Mount Technology,” in Electronic Packaging & Interconnection
Handbook, 2nd ed., C. A. Harper (ed.), New York: McGraw-Hill, 1997, pp. 9.50–9.51.
[24] Cohn, C., and M. T. Shih, “Packaging and Interconnection of Integrated Circuits,” in Elec-
tronic Packaging & Interconnection Handbook, 2nd ed., C. A. Harper (ed.), New York:
McGraw-Hill, 1997, pp. 6.14–6.17.
[25] Cohn, C., and M. T. Shih, “Packaging and Interconnection of Integrated Circuits,” in Elec-
tronic Packaging & Interconnection Handbook, 2nd ed., C. A. Harper (ed.), New York:
McGraw-Hill, 1997, pp. 6.46–6.56.
[26] Available from The U.S. Department of Defense, Single Stock Point for Military Specifica-
tions, Standards and Related Publications, Bldg. 4/D, 700 Robbins Avenue, Philadelphia,
PA, 19111–5094, http://www.dodssp.daps.mil.
[27] Telcordia ® Technologies, One Telcordia Drive, Piscataway, NJ 08854, http://www.
telcordia.com.
(
[28] Bajenescu, T. I., and M. I. Bâzu, Reliability of Electronic Components, New York: Springer,
1999, pp. 9–20.
[29] Kececioglu, D., Reliability Engineering Handbook, Vol. 1, Engelwood Cliffs, NJ: Prentice
Hall, 1991, pp. 107–323.
[30] Glasstone, S., K. J. Laidler, and H. Eyring, The Theory of Rate Processes, New York:
McGraw-Hill, 1941.
[31] DeGroot, M. H., and M. J. Schervish, Probability and Statistics, 3rd ed., Boston, MA: Pear-
son Addison Wesley, 2002.
[32] NIST/SEMATECH e-Handbook of Statistical Methods, Section 8.1.5.2, 2003,
http://www.itl.nist.gov/div898/handbook.
[33] Nelson, W., Accelerated Testing: Statistical Models, Test Plans, and Data Analyses, New
York: Wiley, 1990, pp. 51–106, 521–543.
[34] Accelerated Life Testing Reference, ReliaSoft Corporation, 115 South Sherwood Village
Dr., Tucson, AZ 85710, 2001, http://www.weibull.com.
[35] Allameh, S. M., et al., “Surface Topography Evolution and Fatigue Fracture in Polysilicon
MEMS Structures,” Journal of Microelectromechanical Systems, Vol. 12, No. 3, June 2003,
pp. 313–324.
[36] Tanner, D. M., et al., “MEMS Reliability in Shock Environments,” in Proceedings IEEE
International Reliability Physics Symposium, San Jose, CA, April 2000, pp. 129–138.
[37] Reynolds, J. K., et al., “Packaging a Piezoresistive Pressure Sensor to Measure Low Absolute
Pressures over a Wide Sub-Zero Temperature Range,” Sensors and Actuators A: Physical,
Vol. 83, 2000, pp. 142–149.
[38] Srikar, V. T., and S. D. Senturia, “The Reliability of Microelectromechanical Systems
(MEMS) in Shock Environments,” Journal of Microelectromechanical Systems, Vol. 11,
No. 3, June 2002, pp. 206–214.
[39] Hyman, D., and M. Mehregany, “Contact Physics of Gold Microcontacts for MEMS
Switches,” IEEE Transactions on Components and Packaging Technology, Vol. 22, Sep-
tember, 1999, pp. 357–364.
[40] Goldsmith, C., et al., “RF MEMS: Benefits and Challenges of an Evolving Switch Technol-
ogy,” in the 23rd Annual Technical Digest, Gallium Arsenide Integrated Circuit (GaAs IC)
Symposium, October 21–24 , 2001, pp. 147–148.
[41] Douglass, M. R., “DMD Reliability: A MEMS Success Story,” in Reliability, Testing and
Characterization of MEMS/MOEMS II, R. Ramesham and D. M. Tanner (eds.), Proceeding
of the SPIE, Vol. 4980, January 2003, pp. 1–11.
[42] Douglass, M. R., “Lifetime Estimates and Unique Failure Mechanisms of the Digital Micro-
mirror Device (DMD),” Proceedings of IEEE International Reliability Physics Symposium,
1998, pp. 9–16.
[43] U.S. Patents 4,662,746, May 5, 1987, and 5,083,857, January 28, 1992.
[44] U.S. Patent 6,204,085, March 20, 2001.