Page 235 - Applied Petroleum Geomechanics

230 Applied Petroleum Geomechanics

Edwards, S.T., Bratton, T.R., Standifird, W.B., 2002. Accidental geomechanics e capturing
in-situ stress from mud losses encountered while drilling. SPE/ISRM 78205 presented
at the SPE/ISRM Rock Mechanics Conference Held in Irving, Texas.
Gibson-Poole, C.M., Lang, S.C., Streit, J.E., Kraishan, G.M., Hillis, R.R., 2002. Assessing a
basin’s potential for geological sequestration of carbon dioxide: an example from the
Mesozoic of the Petrel Sub-basin, NW Australia. In: Keep, M., Moss, S. (Eds.), Sedi-
mentary Basins of Western Australia, vol. 3. Oilfield Publications, pp. 439e463.
Haimson, B.C., Cornet, F.H., 2003. ISRM suggested methods for rock stress estimation e
part 3: hydraulic fracturing (HF) and/or hydraulic testing of pre-existing fractures
(HTPF). Int. J. Rock Mech. Min. Sci. 40, 1011e1020.
Haimson, B.C., Fairhurst, C., 1967. Initiation and extension of hydraulic fractures in rocks.
SPE J. 7, 310e318.
Hawkes, C., Bachu, S., Haug, K., Thompson, A., 2005. Analysis of in-situ stress regime in
the Alberta basin, Canada, for performance assessment of CO 2 geological sequestration
sites. In: 4th Annual Conf. on Carbon Capture and Sequestration, DOE/NETL, May
2e5, 2005.
Hoek, E., Brown, E.T., 1980. Underground Excavations in Rock. Institution of Mining
and Metallurgy, London.
Huang, J., Griffiths, D.V., Wong, S.W., 2010. In situ stress determination from inversion of
hydraulic fracturing data. Int. J. Rock Mech. Min. Sci. 48, 476e481.
Hubbert, M.K., Willis, D.G., 1957. Mechanics of hydraulic fracturing. Pet. Trans. AIME
210, 153e168.
Ito, T., Evans, K., Kawai, K., Hayashi, K., 1999. Hydraulic fracture reopening pressure and
the estimation of maximum horizontal stress. Int. J. Rock Mech. Min. Sci. 36 (6),
811e826.
Jones, C., Sargeant, J.P., 1993. Obtaining the minimum horizontal stress from microfracture
test data: a new approach using a derivative algorithm. SPE Prod. Facil. Feb., 39e44.
Klee, G., Bunger, A., Meyer, G., Rummel, F., Shen, B., 2011. In situ stresses in borehole
Blanche-1/South Australia derived from breakouts, core discing and hydraulic frac-
turing to 2 km depth. Rock Mech. Rock Eng. 44, 531e540.
Li, S., Purdy, C., 2010. Maximum horizontal stress and wellbore stability while drilling:
modeling and case study. Paper SPE 139280.
Ljunggren, C., Chang, Y., Janson, T., Christiansson, R., 2003. An overview of rock stress
measurement methods. Int. J. Rock Mech. Min. Sci. 40 (7/8), 975e989.
Lønø, G., 1995. In Situ Measurements and Rock Mechanics Testing of Overburden Rock
from the Ekofisk Field, North Sea. M.Sc. thesis, New Mexico Inst. of Mining and
Tech.
Martin, R., Cramer, D., Nunez, O., Roberts, N., 2012. A method to perform multiple
diagnostic fracture injection tests simultaneously in a single wellbore. SPE-152019.
Meng, Z., Zhang, J., Wang, R., 2011. In-situ stress, pore pressure and stress-dependent
permeability in the Southern Qinshui Basin. Int. J. Rock Mech. Min. Sci. 48, 122e131.
Nelson, P.H., 2003. A review of the multiwell experiment, Williams Fork and Iles For-
mations, Garfield County, Colorado. In: Petroleum Systems and Geologic Assessment
of Oil and Gas in the Uinta-Piceance Province, Utah and Colorado. U.S. Geol. Survey
Digital Data Series DDS-69-B, pp. 1e14 (Chapter 15).
Nelson, E.J., Meyer, J.J., Hillis, R.R., Mildren, S.D., 2005. Transverse drilling induced
tensile fractures in the West Tuna area, Gippsland Basin, Australia: implications for the
in situ stress regime. Int. J. Rock Mech. Min. Sci. 42, 361e371.
Nelson, E.J., Chipperfield, S.T., Hillis, R.R., Gilbert, J., McGrowen, J., Mildren, S.D.,
2007. The relationship between closure pressure from fluid injection tests and the
minimum principal stress in strong rocks. Int. J. Rock Mech. Min. Sci. 44, 787e801.