Page 183 - APPLIED PROCESS DESIGN FOR CHEMICAL AND PETROCHEMICAL PLANTS, Volume 1, 3rd Edition

158 Applied Process Design for Chemical and Petrochemical Plants

Quandt, E., Analysis of Gas-Liquid Flow Patterns, A.I.Ch.E., 6th Wohl, M. H., “Rheology of Non-Newtonian Materials,” Chem.
Nat’l Heat Transfer Conference, Boston, Mass., Aug. 1963. Eng., vol. 75, no. 4, 1968, p. 130.
Simpson, Larry L., “Sizing Piping for Process Plants,” Chem. Cindric, D. T., Gandhi, S. L., Williams, R. A., “Designing Piping
Eng., June 17, 1968, pp. 192-214. Systems for Two-Phase Flow,” Chem. Eng. Prog., vol. 83, no. 3,
1987, p. 51.
Vohr, J. H., Flow Patterns of Two-Phase Flow-A Survey of Literature,
CU-2-20-AEC-187-Ch.E. Columbia University, New York. Dukler, A. E. and Taitel, E, “Flow Patterns in Horizontal and
Near Horizontal Pipes,” Design Manual FM-3, DIMP/AIChE,
Willis, G. B., The Dimensional Two-Phase Flow, McGraw-Hill, New
York, 1969. New York, 1982; also see Design Manual WP/AIChE, same ref-
erence.
Parker, R. F., “Programmable Calculators Speed Gas-Line Calcu-
iations,” Oil and Gas Journal, May 7, 1979, p. 67. Riggs, J. B., “Simplified Manifold Design,” Chem. Eng., vol. 95,
no. 14, 1988, p. 95.
Steele, A., “Scouring Action in Piping,” Heating/Piping/Air Con- Hooper, W. B., “Calculate Head Loss Caused by Change in Pipe
ditioning May 1981, p. 89.
Size,” Chem. Eng, vol. 95, no. 16, 1988, p. 89.
‘You’ll Want to Know; NBS Tests Rate Steel Pipe Smoother,”
Heating/Piping/Air Conditioning, May 1981, Clark, J. K, Jr. and Helmick, N. E., “How to Optimize the Design
of Steam Systems,” Chem. Eng., vol. 87, no. 5, 1980, p. 116.
Lanfear, K J. and Coil, J. J., “Modifying Manning’s Equation for
Flow Rate Estimates,” Waterand Sewage Works, March 1978, p. 68. Carleton, A. J. and Cheng, D. C-H., “Pipeline Design for Indus-
trial Slurries,” Chem. Eng., vol. 84, no. 9, 1977, p. 95.
Beaty, R. E., “Mass Measurement Best For Ethane-Rich NGL Goyal, 0. P., “Guidelines on Fluid Flow Systems,” Hydrocarbon
Streams,” Oil and Gas Journal, June 15, 1981, p. 96.
Processing vol. 69, no. 4, 1990, p. 47.
Chiu, C. L. and Seman, J. J., “Head Loss in Spiral Solid-Liquid
Flow in Pipes,” Advances in Solid-Liquid Flow in Pipes and Its Solliman, R., ‘Two-Phase Pressure Drop Computed,” Hydrocar-
bon Processing vol. 63, no. 4, 1984, p. 155.
Application, Ed. I. Zandi, Pergamon Press, 1971, p. 277.
Coulter, D. M. and Bardon, M. F., “Revised Equation Improves Ludwig, Ernest E., “Flow of Fluids for Process Design,” Chem.
Flowing Gas Temperature Prediction,” Oil and Gas Journal, Eng., June 13, 1960, p. 162.
Feb. 26, 1979, p. 107. Tung, P. C. and Mikasinovic, M., “Eliminating Cavitation from
Pressure-Reducing Orifices,” Chem. Eng, Dec. 12, 1983, p. 69.
King, G. G., “Here are Key Design Considerations for CO,
Pipelines,” Oil and Gas Journal, Sept. 27, 1982, p. 219. Lin, S. H., “Pressure Drop for Slurry Transport,” Chem. Eng., May
“Methods for Determination of Velocity, Volume, Dust and Mist 17, 1982, p. 115.
Content of Gases,” Bulletin WF-50, Western Precipitation Div., Hills, P. D., “Designing Piping for Gravity Flow,” Chem. Eng.,
Joy Manufacturing Co. Sept. 5, 1983, p. 111.
HPAC Data Sheet, “C = 40 Flow Chart for Black Steel Pipe,” Fayed A. S. and Otten, L., “Comparing Measured with Calculat-
Heating/Piping/Air Conditioning July 1981. ed Multiphase Flow Pressure Drop,” Oil and Gas Jour, Aug. 22,
1983, p. 136.
Wile, D. D., “Refrigerant Line Sizing,” ASHRAE RP-185,
ASHRAE Technical Committee 8.9, Refrigerant Piping, Amer- Coker, A. K, “Understand Two-Phase Flow in Process Piping,”
ican Society of Heating, Refrigerating and Air Conditioning Chem. Eng. Prog., vol. 86, no. 11, 1990, p. 60.
Engineers, Inc., 1977.
Hewitt, G. F., “Handbook in Multiphase Systems,” G. Hetsroni,
Chierici, G. L., Sclocchi, and Terzi, L., “Pressure, Temperature ed., Hemisphere Press, 1984, p. 2.1-2.94.
Profiles Are Calculated for Gas Flow,” Oil and Gas Journal, Jan. Degance, A. E. and Atherton, Chem. Eng., March 23 and April 20,
7, 1980. 1970.
Kremers, J., “Avoid Water Hammer,” Hydrocarbon Processing, vol. Coker, A. K., Program Evaluates Pressure Drop for Single-phase
62, March 3, 1983, p. 67. Fluids,” Hydrocarbon Processing, vol. 70, no. 2, p. 53.
Rau, J. N. and Hein, M., AGA Gas Flow Equations Can Be Quickly Lednicky, R. and Lindley, N. L., “Reduce Leaks and Corrosion
Done With Program for Hand-Held Calculators.
with Plastic-Lined Pipe,” Chem. Eng. Prog., vol. 87, no. 3, 1991,
Austin, P. P., “How to Simplify Fluid Flow Calculations,” Hydro- p. 45.
carbon Processing, vol. 54, no. 9, 1975. Myerson, E. B., “Calculate Saturated-Gas Loads for Vacuum Sys-
Shah, B. V., “Solving Fluid Flow Problems with Spreadsheets,” tems,” Chem. Eng. Prog., vol. 87, no. 3, 1991, p. 92.
Hydrocarbon Processing, vol. 68, no. 9, 1989, p. 85.
Heming, A,, “Prolong the Service Life of Steam Distribution Sys-
Smith, E. D., “Sizing the Economic Pipe,” Chem. Eng., 1701.96, no. tems,” Chem. Eng. Prog., vol. 87, no. 4, 1991, p. 65.
9, 1989, p. 201.
Mather, J., “Draw Some Help from Hydraulic Grade Lines,”
Meyer, J. M., ‘Versatile Program for Pressure-Drop Calculations,” Chem. Eng. Prog., vol. 86, no. 10, 1990, p. 50.
Chem. Eng., vol. 85, no. 5, 1980, p. 139.
Simko, D. M., “Consider the Effects of Temperature on Tube Fit-
Kohli, I. P., “Steam Tracing of Pipelines,” Chem. Eng., vol. 86, no. tings,” Chem. Eng. Prog., vol. 87, no. 1, 1991, p. 31.
7, 1979, p. 155.
Carey, L. A. and Hammitt, D., “How to Select Liquid-Flow Con-
Dumbaugh, G. D., “Flow from Bulk-Solid Storage Bins,” Chem. trol Valves,” Chem. Eng. Deskbook, vol. 85, no. 8, April 3, 1978,
Eng., vol. 86, no. 7, 1979, p. 189. p. 137.