Page 458 - 02. Subyek Computer Aided Design - Beginner’s Guide to SOLIDWORKS 2019- Level 1 by Alejandro Reyes

Beginner's Guide to SOLIDWORKS 2019- Level I

Top Compression Ring Middle Compression Ring

TIP: Using the Section View command's default behavior makes a section

the full width of the view; since we only need a section of one side of the

ring to show its profile, after adding the Top view, draw a line using the

sketch Line tool as indicated, and with the line selected, select the "Section

View" command. By using a line that doesn't cut through the entire model

the option "Partial Section" should be ON by default; additionally turn on the "Slice

section" option to show only the section's surface.

Section Detail Broken-out Break Crop

View View Section View

E - - ---- --··-
IJ IJ
Section View

_ Adds a section view,aligned section

view, or half section view by cutting

the parent view with a section line.

After making the section view it will be aligned to the Top view and have the same

scale. To get a bigger view of the compression ring's profile, right-mouse-click in it

and select "Alignment, Break Alignment" to un-lock the view's alignment and allow

us to reposition it. Locate the section view centered above the Top view and

change its scale to 8:1; continue adding dimensions and annotations as needed to

complete the drawing.

460