Page 463 - Cam Design Handbook

THB13 9/19/03 7:56 PM Page 451

CAM SYSTEM DYNAMICS—RESPONSE 451

REFERENCES

Chen, F.Y., “Assessment of the Dynamic Quality of a Class of Dwell-Rise-Dwell Cams,” Trans-
actions of the ASME, Journal of Mechanical Design, 103: 793–802, October 1981.
Chen, F.Y., Mechanics and Design of Cam Mechanisms, Pergamon Press, New York, 1982.
Chew, M., and Chuang C.H., “Designing for Lower Residual Vibrations in High-Speed Cam-
Follower Systems Over a Range of Speeds,” Proceedings of the 1990 ASME Design Technical
Conferences-21st Biennial Mechanisms Conference, Session M4: CAMS-I, Chicago, Ill., September
16–19, 1990. DE-Vol. 26: 23–31, 1990.
Chew, M., Freudenstein, F., and Longman, R.W., “Application of Optimal Control Theory to the
Synthesis of High-Speed Cam-Follower Systems. Part 1: Optimality Criterion and Part 2: System
Optimization,” Transactions of the ASME, Journal of Mechanisms, Transmissions, and Automa-
tion in Design, Vol. (105): 576–591, September 1983.
Dudley, W.M., “New Methods in Valve Cam Design,” Transactions of the Society of Automotive Engi-
neers, 2: 19, January 1948.
Freudenstein, F., “On the Dynamics of High-Speed Cam Profiles,” International Journal of
Mechanical Science, 1: 342–349, 1960.
Gupta, K.C., and Wiederrich, J.L., “Development of Cam Profiles Using the Convolution Operator,”
Transactions of the ASME, Journal of Mechanisms, Transmissions, and Automation in Design, 105:
654–657, 1983.
Hrones, J.A., “Analysis of Dynamic Forces in a Cam-Driven System”, Transactions of the American
Society of Mechanical Engineers (70): 473–482, 1948.
Hussman, A.W., Rechnerische Verfahren Zur Harmonischen Analyze und Synthese, Julius Springer
Verlage, Berline 1938.
Hussmann, A.W., “Schwingungen in Schraubenförmigen Ventililfedern,” Jahrbuch der Deutschen
Luftfahrtschung, Part 2, pp. 119–133, 1938(b).
Mitchell, D.B., “Tests on Dynamic Response of Cam-Follower Systems,” Mechanical Engineering,
(72): 467–74, 1950.
Neklutin, E.N., “Designing Cams for Controlled Inertia and Vibration,” Machine Design, pp.
154–160, June 1952.
Neklutin, C.N., “Vibration Analysis of Cams,” Transactions of the Second Conference on
Mechanisms, Penton Publishing Co., Cleveland, 1954.
Stoddart, D.A., “Polydyne Cam Design,” Machine Design 25: 121, January 1953; 146, February 1953;
149, March, 1953.
Wiederrich, J.L., “Residual Vibration Criteria Applied to Multiple Degree of Freedom Cam Follow-
ers,” Transactions of the ASME, Journal of Mechanical Design, October: 702–705, 1981.
Wiederrich, J.L., Personal Communication, 2001.
Wiederrich, J.L., and Roth, B., Dynamic Synthesis of Cams Using Finite Trigonometric Series, Trans-
actions of the ASME, Journal of Engineering for Industry, pp. 287–293, February 1975.
Wiederrich, J.L., and Roth, B., “Design of Low Vibration Cam Profiles,” in Jones, J.R. (ed.) Cams
and Cam Mechanisms, Mechanical Engineering Publications Ltd. for the Institution of Mechani-
cal Engineers, Suffolk 1978.