Page 106 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 3. Measurements of interfacelinterlaminar properties 89

Kim, J.K. (1997). Stress transfer in the fibcr fragmentation test. part 111. Effects of interface debonding
and matrix yielding. J. Mater. Sci. 32, 701-71 1.
Kim, J.K. and Mai, Y.W. (1991). High strength, high fracture toughness fiber composites with interface
control-a review. Composites Sci. Technol. 41, 333-378.
Kim, J.K., Baillie, C. and Mai, Y.W. (1992). Interfacial debonding and fiber pull-out stresses, part I. A
critical comparison of existing theories with experiments. J. Mater. Sci. 27, 3143-3154.
Kim, J.K. and Mai, Y.W. (1993). Interfaces in composites. In Structure and Properties of Fiber
Composites, Materials Science and Technology, Series Vol. 13, (T.W. Chou ed.), VCH Publishers,
Weinheim, Gcrmany, Ch. 6, pp. 239-289.
Kim, J.K., Zhou, L.M. and Mai, Y.W. (1993). Stress transfer in the fiber fragmentation test. Part I. An
improved model based on the shear strength criterion. J. Muter. Sci. 28, 62336245.
Kim, J.K., Zhou, L.M. and Mai, Y.W. (1994). Techniques for Studying Composite Interfaces. in
Handbook of Advanced Materials Testing (N.P. Cheremisinoff ed.), Marcel Dekker, New York.
Chapter 22, pp. 327-366.
Kim, R.Y. (1989). Experimental observation of free-edge delamination. In Interlaminar Response uf
Composite Materials. (N.J. Pagano ed.), Elsevier Sci. Pub. Amsterdam, Ch. 3, pp. 11 1-160.
Lacroix, Th., Tilmans, B., Keunings, R., Desaeger, M. and Verpoest, I. (1992). Modelling of critical fiber
length and interfacial debonding in the fragmentation testing of polymer composites. Composites Sci.
Technol. 43, 379-387.
Lee, S. and Munro, M. (1986). Evaluation of in-plane shear test methods for advanced composites
materials by the decision analysis technique. Composites 17, 13-22.
Lee. S. and Munro, M. (1990). Evaluation of testing techniques for the Iosipescu shear test for advanced
composite materials. J. Composite Mater. 21, 419-440.
Leng, Y. and Courtney, T.H. (1990). Ineffective length in metal matrix composites. Mater. Sci. Eng. A124,
141-149.
Ling, S. and Wagner, H.D. (1993). Relationship between fiber flaw spectra and the fragmentation
processes: a computer simulation investigation. Composites Sci. Technol. 48, 3546.
Liu, H.Y., Mai, Y.W., Zhou, L.M. and Ye, L. (1994). Simulation of the fiber fragmentation process by a
fracture mechanics analysis. Composites Sci. Technol. 52, 253-260.
Liu, H.Y., Mai, Y.W., Zhou, L.M. and Ye, L. (1995). On the effects of interface debonding and transverse
matrix cracking in fiber fragmentation test. In Proc. 4th International SAMPE Symposium, Tokyo,
Japan. (Z. Maekawa et al. eds.) Vol. I, pp. 1-6
Lu, G.Y. and Mai, Y.W. (1994). A theoretical model for evaluation of interfacial properties of fiber
reinforced ceramics with the slice compression test. Composites Sci. Technol. 51, 565-574.
Madhukar, M.S. and Drzal, L.T. (1991). Fiber-matrix adhesion and its effects on composite mechanical
properties: 11. Longitudinal (OO) and transverse (90") tensile and flexural behaviour of graphite/epoxy
composites. J. Composite Mater. 25, 958-991.
Mandell, J.F., Chen, J.H. and McGarry, F.J. (1980). A microdebonding test for in situ assessment of
fiber/matrix bond strength in composite materials. Int. J. Adhesion Adhesives 1, 4W.
Marshall, D.B. (1984). An indentation method for measuring matrix-fiber frictional stresses in ceramic
composites. J. Am. Ceram. SOC. 67, C259-260.
Marshall, D.B. and Oliver, W.C. (1987). Measurement of interfacial mechanical properties in fiber-
reinforced ceramic composites. J. Am. Ceram. Soc. 70, 542-548.
Marshall, P. and Price, J. (1991). Fiber/matrix interface failure controlled by a critical energy criterion.
Composites. 22, 445447.
Manor, A. and Clough, R.B. (1992). In-situ determination of fiber strength and segment length in
composites by means of acoustic emission. Composites Sci. Technol. 45, 73-81.
McAlea, K.P. and Besio, G.J. (1988). Adhesion between polybutylene terephthalate and E-glass measured
with a microbond technique. Polym. Composites, 9, 285290.
Merle, G. and Xie, M. (1991). Measurement of the adhesion of poly(ether block amide) to E-glass by
single filament fragmentation. Composites Sci. Technol. 40, 19-30.
Miller, B., Muri, P. and Rebenfeld, L. (1987). A microbond method for determination of the shear
strength of a fiber/resin interface. Composites Sci. Technol. 28, 17-32.