Page 109 - Engineered Interfaces in Fiber Reinforced Composites

92 Engineered interfaces in fiber reinforced composites

Vu-khanh, T. (1987). Crack arrest study in mode 11 delamination in composites. Polym. Composites 8,
331.
Walrath, D.E. and Adams, D.F. (1983). The Iosipescu shear test as applied to composite materials. Exper.
Mech. 23, 105-1 10.
Wang, S.S. (1984). Edge delamination in angle ply composite laminates. AIAA J. 2, 256-264.
Wang, S.W., Kahn, A., Sands, R. and Vasudevan, A.K. (1992). A novel nanoindenter technique for
measuring fiber-matrix interfacial strength in composites. J. Mater. Sei. Lett. 11, 739-741.
Wang, Y. and Williams, J.G. (1992). Corrections for mode I1 fracture toughness specimens of composite
materials. Composites Sei. Technol. 43, 251-256.
Watson, M.C. and Clyne, T.W. (1992a). The use of single fiber pushout testing to explore interface
mechanisms in Sic monofilament-reinforced Ti. I. A photoelastic study of the test. Acta Metall.
Mater. 40, 131-139.
Watson, M.C. and Clyne, T.W. (1992b). The use of single fiber pushout testing to explore interface
mechanisms in Sic monofilament-reinforced Ti. 11. Application of the test to composite material. Acta
Metall. Mater. 40, 140-148.
Weihs, T.P. and Nix, W. (1991). Experimental examination of the push-down technique for measuring the
sliding resistance of Sic fibers in a ceramic matrix. J. Am. Ceram. SOC. 74, 524-534.
Whitney, J.M. (1989). Experimental Characterization of delamination fracture. in Interlaminar Response
of Composite Materials (N.J. Pagano ed.), Elsevier Science Publishers, Amsterdam, pp. 161-250.
Whitney, J.M. Stansbarger, D.L. and Howell, H.B. (1971). Analysis of the rail shear test-applications and
limitations. J. Composite Mater. 5, 2&34.
Whitney, J.M. (1985). Elasticity analysis of orthotropic beams under concentrated loads, Composites Sei.
Technol. 22, 167-184.
Whitney, J.M. and Browning, C.E. (1985). On short-beam shear tests for composite materials, Exper.
Mech. 42, 294-300.
Whitney, J.M. and Knight, M. (1985). A modified free-edge delamination specimens. In Delamination and
Debonding of Materials, ASTM STP 876 (W.S. Johnson, ed.), ASTM, Philadelphia, PA, pp. 298-314.
Whitney, J.M. and Drzal, L.T. (1987). Axisymmetric stress distribution around an isolated fiber fragment.
In Toughened Composites, ASTM STP 937, (N.J. Johnston ed.), ASTM, PA, pp. 179-196.
Wilkins, D.J., Eisennmann, J.R., Chamin, R.A., Margolis, W.S. and Benson, R.A. (1982). Characterizing
delamination growth in graphite-epoxy. In Damage in Composite Materials: Basic Mechanisms,
Accumulation, Tolerance and Characterization. ASTM STP 115 (K.L. Reifsnider ed.), ASTM,
Philadelphia, PA., p. 168.
Williams, J.G., Davies, P. and Brunner, A.J. (1995). Standard tests for the toughness of composite
laminates-some bones of contention. In Proceedings of Intern. Con$ on Composite Materials (ICCM-
IO), Whistler, Canada. Vol. I, pp. 11-75.
Wimolkiatisak, AS. and Bell, J.P. (1989). Interfacial shear strength and failure modes of interphase
modified graphite-epoxy composites. Polym. Composites 10, 162-1 72.
Yabin, B., Gallis, H.E., Scherf, H., Eitan, A. and Wagner, H.D. (1991). Continuous monitoring of the
fragmentation phenomenon in single fiber composite materials. Polym. Composites 12, 329-350.
Yang, J.M., Jeng, S.M. and Yang, C.J. (1991). Fracture mechanisms of fiber reinforced titanium alloy
matrix composites. Part I. interfacial behaviour. Mater. Sci. Eng. A138, 155-167.
Zhou, L.M., Kim, J.K., Baillie, C.A. and Mai, Y.W. (1995). Fracture mechanics analysis of the fiber
fragmentation test. J Composite Mater. 29, 881-902.
Zweben, C. (1968). Tensile failure of fiber composites. AIAA J. 6, 2325-2331.