Page 104 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 3. Measurements of inierface/interlaminar properties 87

Chiao, C.C., Moore, R.L. and Chiao, T.T. (1977). Measurement of shear properties of fiber composites.
Composites 8, 161-169.
Chuang, S.L. and Chu, N.J. (1990). Effect of polyamic acids on interfacial shear strength in carbon fiber/
aromatic thermoplastics. J. Appl. Polym. Sei. 41, 373-382.
Corleto, C.R. and Bradley, W.L. (1987). In ASTM Second Symposium on Composite Materials: Fatigue
and Fracture, Cincinnati, OH.
Cox, H.L. (1952). The elasticity and strength of paper and other fibrous materials. Brit. J. Appl. Phys. 3,
72-79.
Cui, W.C. and Wisnom, M.R. (1992). Contact finite element analysis of three- and four-point short beam
bending of unidirectional composites. Composites Sci. Technol. 45, 323-334.
Curtin, W.A. (1991). Exact theory of fiber fragmentation in a single filament composite. J. Muter. Sci. 26,
5239-5253.
Davidovitz, M, Mittelman, A., Roman, I. and Marom, G. (1984). Failure modes and fracture
mechanisms in flexure of Kevlar-epoxy composites. J. Mater. Sci. 19, 377-384.
Davies, P. and Moore, D.R. (1990). Glass/nylon-6.6 composites: Delamination resistance testing.
Composites Sei. Technol. 38, 21 1-227.
Davies, P. and Roulin, A. (1989). A standard for interlaminar fracture testing of composites. In Proc.
ECCM 3, Developments in the Science and Technology of Composite Materials. (A.R. Bunsell, P.
Lamicq and A. Massiah eds.), Elsevier Appl. Sci., London, pp. 419-424.
Davies, P., Moulin, C. and Kausch, H.H. (1990). Measurement of GI, and Glic in carbon/epoxy
composites. Composites Sei. Technol. 39, 193-205.
Davies, P. Kausch, H.H., Williams, J.G. and 29 other researchers (1992). Round-robin interlaminar
fracture testing of carbon fiber reinforced epoxy and PEEK composites. Composites Sci. Technol. 43,
129-136.
Desaeger, M. and Verpoest, I. (1993). On the use of the microindentation test technique to measure the
interfacial shear strength of fiber reinforced polymer composites. Composites Sci. Technol. 48, 21 5-
226.
Desarmot, G. and Favre, J.P. (1991). Advanced in pull-out testing and data analysis. Composites Sei.
Technol. 42, 151-187.
Drzal, L.T., Rich, M.J., Camping, J.D. and Park, W.J. (1980). Interfacial shear strength and failure
mechanisms in graphite fiber composites. In 35th Annual Tech. Conf., Reinforced Plast. Composites
hi., SPI, Paper 20C.
Drzal, L.T. and Madhukar, M. (1993). Fiber-matrix adhesion and its relationship to composite
mechanical properties. J. Mater. Sci. 28, 569-610.
Ellul, M.D. and Emerson, R.J. (1988a). A new pull-out test for tire cord adhesion-Part I. Hot bonding.
Rubber Chem. Technol. 61, 293-308.
Ellul, M.D. and Emerson, R.J. (1988b). A new pull-out test for tire cord adhesion-Part 11. Cold bonding,
Rubber Chem. Technol. 61, 309-323.
Favre, J.P. and Jacques, D. (1990). Stress transfer by shear in carbon fiber model composites: Part I
Results of single fiber fragmentation tests with thermosetting resins. J. Mater. Sci. 25, 1373-1380.
Favre, J.P., Sigety, P. and Jacques, D. (1991). Stress transfer by shear in carbon fiber model composites,
Part 2. Computer simulation of the fragmentation test. J. Muter. Sci. 26, 189-195.
Ferber, M.K., Wereszczak, A.A., Hansen, D.H. and Homeay, J. (1993). Evaluation of interfacial
mechanical properties in Sic fiber-reinforced macro-defect-free cement composites. Composites Sci.
Technol. 49, 23-33.
Fisher, S., Rosensaft, M. and Marom, G. (1986). Dependence of the interlaminar shear strength on the
loading span-to-depth ratio in aramid fiber-reinforced beams. Composites Sci. Technol. 25, 69-73.
Fisher, S. and Marom, G. (1984). A complete elastic-plastic analysis of Aramid fiber composites.
Composites Sci. Technol. 20, 91-98.
Galiotis C., Young, R.J., Yeung, P.H.J. Melanitis, N. and Batchelder, D.N. (1984). The study of model
polydiacetylene/epoxy composites. part 1. The axial strain in the fiber. J. Muter. Sci. 19, 3-3648.
Gao, Y.C., Mai, Y.W. and Cotterell, B. (1988). Fracture of fiber-reinforced materials. J. Appl. Math.
Phys. (ZAMP) 39, 55C572.