Page 105 - Engineered Interfaces in Fiber Reinforced Composites

88 Engineered interfaces in fiber reinforced composites

Garcia, R., Weisshaar, T.A. and McWithey, R.R. (1980). An experimental and analytical investigation of
the rail shear test method as applied to composite materials. Exper. Mech. 20, 273-279.
Gaur, U. and Miller, B. (1989). Effects of Environmental exposure on fiber/epoxy interfacial shear
strength. Polym. Composites 11, 217-222.
Gaur, U. and Miller, B. (1990). Microbond method for determination of the shear strength of a fiber/resin
interface: evaluation of experimental parameters. Composites Sei. Technol. 34, 35-5 1.
Gent, A.N. and Kaang, S.Y. (1989). Pull-out and push-out tests for rubber-to-metal adhesion. Rubber
Chem. Technol. 62, 757-766.
Gillespie Jr., J.W., Carlsson, L.A. and Pipes, R.B. (1986). Finite element analysis of the end notched
flexure (ENF) specimen measuring mode I1 fracture toughness. Composites Sei. Techno/. 26, 177.
Goettler, R.W. and Faber, K.T. (1989). Interfacial shear stress in fiber-reinforced glasses. Composites Sei.
Technol. 37, 129-147.
Grande, D.H., Mandell, J.F. and Hong, K.C.C. (1988). Fiber-matrix bond strength studies of glass and
metal matrix composites. J. Muter. Sei. 23, 31 1-328.
Greszczuk, L.B. (1967). in Proc. 2nd Reinforced Plastics Meeting, Washington DC. SPI, New York, Paper
20A.
Griffin, C.W., Limaye, S.Y. and Richerson, D.W. (1988). Evaluation of interfacial properties in
borosilicate SIC composites using pull-out tests. Ceram. Eng. Sci. Proc. 9, 671-678.
Gulino, R. and Phoenix, L. (1991). Weibull strength statistics for graphite fibers measured from the break
progression in a model graphite/glass/epoxy microcomposites. J. Muter. Sei. 26, 3107-31 18.
Gulino, R., Schwartz, P. and Phoenix, L. (1991). Experiments on shear deformation, debonding and local
load transfer in a model graphite/ glass/epoxy microcomposites. J. Muter. Sei. 26, 6655-6672.
Gurney, C. and Hunt, J. (1967). Quasi-static crack propagation. Proc. Roy. Soc. Lond. A299, 508-524.
Hashemi, S., Kinloch, A.J. and Williams, J.G. (1989). Corrections needed in double-cantilever beam tests
for assessing the interlaminar failure of fiber-composites. J. Muter. Sei. Lett. 8, 125-129.
Hashemi, S., Kinloch, A.J. and Williams, J.G. (1990a). Mechanics and mechanisms of delamination in a
PES-fiber composites. Composites Sei. Technol. 37, 429462.
Hashemi, S., Kinloch, A.J. and Williams, J.G. (1990b). The analysis of interlaminar fracture in uniaxial
fiber-polymer composites. Proc. Roy. SOC. Lond. A421, 173-199.
Henstenburg, R.B. and Phoenix, S.L. (1989). Interfacial shear strength studies using the single-filament-
composite test, part 11. A probability model and Monte Carlo simulation. Polym. Composites 10, 389-
408.
Herrera-Franco, P.J. and Drzal, L.T. (1992). Comparison of methods for the measurement of fiber/matrix
adhesion in composites. Composites, 23, 2-27.
Hsueh, C.H. (1993). Analysis of slice compression tests for aligned ceramic matrix composites. Acta
Metull. Muter. 41, 3585-3593.
Hu, X.Z. and Mai, Y.W. (1993). Mode I delamination and fiber bridging in carbon fiber expoxy
composites with and without PVAL coating. Composites Sei. Techno/. 46, 147-156.
Huang, X.N. and Hull, D. (1989). Effects of fiber bridging on GI, of a unidirectional glass/epoxy
composites. Composites Sei. Technol. 35, 283-299.
Ikuta, N., Maekawa, Z., Hamada, H., Ichihashi, M. and Nishio, E. (1991). Evaluation of interfacial
properties in glass fibcr-epoxy resin composites-reconsideration of an embedded single filament shear-
strength test. J. Muter. Sei. 26, 46634666.
Iosipescu, N. (1967). New accurate procedure for single shear testing of metals. J. Metal 2, 537-566.
Jung, T., Subramanian, R.V. and Manoranjan, V.S. (1993). Prediction of fiber strength at the critical
length: A simulation theory and expcrimental verification for bimodally distributed carbon fiber
strength. J. Mater. Sei. 28, 4489496,
Kalanta, J. and Drzal, L.T. (1990). The debonding mechanism of aramid fibers to epoxy matrices, part 11.
An experimental investigation. J. Muter. Sei. 25, 4194-4202.
Kallas, M.N., Koss, D.A., Hahn, H.T. and Hellmann, J.R. (1992). Intcrfacial stress state present in a thin
slice fiber push-out test. J. Muter. Sei. 27, 3821-3826.
Kelly, A. and Tyson, W.R. (1965). Tensile properties of fiber-reinforced metals: copper/tungsten and
copper/molybdenum. J. Mech. Phys. Solids 13, 329-350.