Page 185 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 4. Micromechunics of stress transfer 167
Lawrence, S. (1972). Some theoretical considerations of fiber pull-out from an elastic matrix. J. Mater.
Sci. 7, 1-6.
Laws, L., Lawrence, P. and Nurse, R.W. (1973). Reinforcement of brittle matrices by glass fibers. J. Phys.
D. A&. Phys. 6, 523-537.
Laws, V. (1982). Micromechanical aspects of the fiber-cement bond. Composites 13, 145-151.
Lee, J.W. and Daniel, I.M. (1992). Deformation and failure of longitudinally loaded brittle matrix
composites. In Composite materials: Testing and Design (Tenih Vol.). ASTM STP 1120, (G.C.
Grimes, ed.), ASTM, Philadelphia, P.A., pp. 204-221.
Lcung, C.K.Y and Li, V.C. (1991). A ncw strength-based model for the debonding of discontinuous fibers
in an elastic matrix. J. Muter. Sci. 26, 599M100.
Lhotellier, F.C. and Brinson, H.F. (1988). Matrix fiber stress transfer in composite materials: Elasto-
plastic model with an interphase layer. Composiie Structures 10, 281-301.
Liang, C. and Hutchinson, J.W. (1993). Mechanics of the fiber pushout test. Mech. Mater. 14, 207 221.
Liu, H.Y., Zhou, L.M. and Mai, Y.W. (1994a). On fiber pull-out with a rough interface. Phil. Mag. A, 70,
359-372.
Liu. H.Y., Zhou, L.M. and Mai, Y.W. (1995). Effect of interface roughness on fiber push-out stress. J.
Am. Ceram. Soc., 78, 56G566.
Liu, H.Y., Mai, Y.W., Zhou. L.M. and Ye, L. (199413). Simulation of the fiber fragmentation process by a
fracture mechanics analysis. Composites Sci. Technol. 52, 253-260.
Liu, H.Y., Mai, Y.W., Ye, L. and Zhou, L.M. (1997). Stress transfer in the fiber fragmentation test. 3.
EffPct of matrix cracking and interface debonding. J. Mater. Sei. 32, 633-641.
Lu, G.Y. and Mai, Y.W. (1995). Effect of plastic coating on fiber-matrix interface debonding. J. Muter.
Sci. 30, 5872-5878.
Mackin, T.J., Warren, P.D. and Evans, A.G. (1992a). Effects of fiber roughness on interface sliding in
composites. Acta Metall. Muter. 40, 1251-1257.
Mackin, T.J., Yang, J. and Warren, P.D. (1992b). Influence of fiber roughness on the sliding behavior of
sapphire fibers in TiAl and glass matrices. J. Am. Ceram. Sac. 75, 3358-3362.
MacLaughlin, T.F. and Barker, R.M. (1972). Effect of modulus ratio on stress near a discontinuous fiber.
E.YP. Mech. 12, 178-183.
Majumda, B.S. and Miracle, D.B. (1 996). Interface measurement and applications in fiber reinforced
MMCs. Key Eng. Mater. 116117, 153-172.
Marotzke, Ch. (1993). Influence of the fiber length on the stress transfer from glass and carbon fibers into
a thermoplastic matrix in the pull-out test. Composite Interfuces 1, 153-1 66.
Marotzke, Ch. (1994). The elastic stress field arising in the single fiber pull-out test. Composites Sci.
Technol. 50, 393405.
Marshall, D.B. (1992). Analysis of fiber debonding and sliding experiments in brittle matrix composites.
Acta Metall. Mater. 40, 427442.
Marshall, D.B. and Oliver, W.C. (1987). Measurement of interfacial mechanical properties in fiber-
reinforced ceramic composites. J. Am. Ceram. Sor. 70, 542-548.
Marshall, D.B. and Oliver, W.C. (1990). An indentation method for measuring residual stresses in fiber
reinforced ceramics. Mater. Sci., Eng. A 126, 95-103.
Marshall, D.B., Shaw, M.C. and Morris, W.L. (1992). measurement of interfacial debonding and sliding
resistance in fiber reinforced intermetallics. Acta Metall. Mater. 40, 443-454.
Meda, G., Hoysan, S.F. and Steif, P.S. (1993). The effect of fiber Poisson expansion in micro-indentation
tests. Trans. ASME J. Appl. Mech. 60, 986-991.
Mital, S.K., Murthy, P.L.N. and Chamis, C.C. (1993). Interfacial microfracture in high temperature metal
matrix composite. J. Composite Muter. 27, 1678-1 694.
Muki, R. and Sternberg, E. (1969). On the diffusion of an axial load from an infinite cylindrical bar
embedded in an elastic medium. Int. J. So1id.s Structures 5, 587-605.
Muki, R. and Sternberg, E. (1971). Load-absorption by a discontinuous filament in a fiber-reinforced
composite. J. Appl. Maih. Phys. (ZAMP) 22, 809-824.
Naaman, A.E., Namur, G.G., Alwan, J.M. and Najm, H.S. (1992). Fiber pullout and bond slip. II:
Experimental validation. ASCE J. Siruc. Eng. 117, 2791-2800.