Page 187 - Engineered Interfaces in Fiber Reinforced Composites

Chapter 4. Micromechanics of stress transfer 169

Yue, C.Y. and Cheung, W.L. (1992). Interfacial properties of fibrous composites. .I. Mater. Sci. 27, 3173-
3 180.
Zhou, L.M. and Mai, Y.W. (1992). A three-cylinder model for evaluation of sliding resistance in fiber
push-out test. in Ceramic,s Adding the Value (M.J. Bannister, ed.), CSIRO Pub, Melbourne. pp. 11 13-
1118.
Zhou, L.M.. Kim, J.K. and Mai, Y.W. (1992a). Interfacial debonding and fiber pull-out stresses: Part 11.
A new model based on the fracture mechanics approach. J. Muter. Sci. 27, 3155-3166.
Zhou, L.M., Kim. J.K. and Mai, Y.W. (1992b). A comparison of instability during interfacial debonding
in fiber pull-out and fiber push-out. In Proc. Second Intern. Symp. on Composite Materials and
Srructurrs ilSCMS-2) (C.T. Sun and T.T. Loo, eds.), Peking University press, Beijing, pp. 284289.
Zhou. L.M.. Kim, J.K. and Mai, Y.W. (1992~). On the single fiber pull-out problem: Effect of loading
methods. Composites Sci. Technol. 45, 153-160.
Zhou, L.M., Kim, J.K. and Mai. Y.W. (1993). Micromechanical characterization of fiber-matrix
interface. Composites Sci. Technol. 48, 227-236.
Zhou, L.M., Mai, Y.W. and Baillie, C. (1994). Interfacial debonding and fiber pull-out stresses. part V. A
methodology for evaluation of interfacial properties. J. Mater. Sci. 29, 5541-5550.
Zhou, L.M.. Kim. J.K., Baillie, C. and Mai, Y.W. (1995a). Fracture mechanics analysis of the fiber
fragmentation test. J. Composite Mater. 29, 881-902.
Zhou, L.M., Mai, Y.W., Ye, L. and Kim, J.K. (1995b). Techniques for evaluating interfacial properties of
fiber-matrix composites. Key Eng. Mater. 104-107, 549-600.
Zhou, L.M. and Mai, Y.W. (1993). On the single fiber pullout and pushout problem: effect of fiber
anisotropy. J. Appl. Math. Phys. (ZAMP) 44, 769-775.
Zhou. L.M. and Mai, Y.W. (1994). Analysis of fiber frictional sliding in fiber bundle pushout test. J. Ani.
Cerum. Sur. 77, 20762080.
Zhou, L.M. and Mai, Y.W. (1995). Analyses of fiber push-out test based on fracture mechanics approach.
Composites Eng. 5, 1199 -1219.