Page 13 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS
P. 13
Engineering Design with SOLIDWORKS® 2018 Introduction
SmartMates 3-44
Coincident/Concentric SmartMate 3-45
Tolerance and Fit 3-47
Exploded View 3-51
Section View 3-56
Analyze an Interference Problem 3-58
Save As Copy Option 3-59
Save as 3-59
Save as copy and continue 3-59
Save as copy and open 3-59
GUIDE-ROD Assembly-Pattern Driven Component Pattern 3-62
Linear Component Pattern Feature 3-64
Folders and Suppressed Components 3-66
Make-Buy Decision-3D ContentCentral 3-67
CUSTOMER Assembly 3-69
Copy the CUSTOMER Assembly - Apply Pack and Go 3-75
Point at the Center of Mass 3-77
Project Summary 3-79
Questions/Exercises 3-80
Project 4 - Fundamentals of Drawing 4-1
Project Objective 4-3
Project Situation 4-4
Project Overview 4-4
Drawing Template and Sheet Format 4-5
Sheet Format and Title Block 4-12
Company Logo 4-17
Save Sheet Format and Save As Drawing Template 4-18
GUIDE Part-Modify 4-22
GUIDE Part Drawing 4-23
Move Views and Properties of the Sheet 4-26
Auxiliary View, Section View and Detail View 4-29
Auxiliary View 4-29
Section View 4-29
Detail View 4-30
Partial Auxiliary Drawing View - Crop Drawing View 4-33
Display Modes and. Performance 4-35
Detail Drawing 4-37
Move Dimensions in the Same View 4-40
Move Dimensions to a Different View 4-44
Dimension Holes and the Hole Callout 4-45
Center Marks and Centerlines 4-48
Modify the Dimension Scheme 4-50
GUIDE Part-Insert an Additional Feature 4-54
General Notes and Parametric Notes 4-56
Revision Table 4-59
Part Number and Document Properties 4-61
Exploded View 4-67
Balloons 4-69
Bill of Materials 4-71
Insert a Center of Mass Point into a drawing 4-76
PAGE I - 9
