Page 14 - Subyek Computer Aided Design - [David Planchard] Engineering Design with SOLIDWORKS
P. 14
Introduction Engineering Design with SOLIDWORKS® 2018
Project Summary 4-78
Questions/Exercises 4-78
Project 5 - Extrude and Revolve Features 5-1
Project Objective 5-3
Project Overview 5-4
Design Intent 5-6
Project Situation 5-9
Part Template 5-11
BATTERY Part 5-15
BATTERY Part - Extruded Boss/Base Feature 5-17
BATTERY Part - Fillet Feature Edge 5-21
BATTERY Part- Extruded Cut Feature 5-23
BATTERY Part - Fillet Feature 5-25
BATTERY Part - Extruded Boss/Boss Feature 5-26
Injection Molded Process 5-32
BATTERYPLATE Part 5-33
Save As, Delete, Edit Feature and Modify 5-34
BATTERYPLATE Part- Extruded Boss/Base Feature 5-36
BATTERYPLATE Part- Fillet Features: Full Round and Multiple Radius Options 5-37
Multi-body Parts and the Extruded Boss/Base Feature 5-40
LENS Part 5-42
LENS Part-Revolved Base Feature 5-43
LENS Part-Shell Feature 5-46
Extruded Boss/Base Feature and Convert Entities Sketch tool 5-47
LENS Part-Hole Wizard 5-48
LENS Part - Revolved Boss Thin Feature 5-50
LENS Part - Extruded Boss/Boss Feature and Offset Entities 5-52
LENS Part - Extruded Boss/Boss Feature and Transparency 5-54
BULB Part 5-56
BULB Part - Revolved Base Feature 5-57
BULB Part - Revolved Boss Feature and Spline Sketch tool 5-60
BULB Part - Revolved Cut Thin Feature 5-61
BULB Part - Dome Feature 5-63
BULB Part - Circular Pattern Feature 5-64
Customizing Toolbars and Short Cut Keys 5-68
Design Checklist and Goals before Plastic Manufacturing 5-70
Mold Base 5-72
Applying SOLIDWORKS Features for Mold Tooling Design 5-72
Manufacturing Design Issues 5-82
Project Summary 5-83
Questions/Exercises 5-84
Project 6 - Swept, Lofted and Additional Features 6-1
Project Objective 6-3
Project Overview 6-4
Project Situation 6-5
0-RING Part - Swept Base Feature 6-7
0-RING Part - Design Table 6-8
SWITCH Part - Lofted Base Feature 6-12
SWITCH Part - Dome Feature 6-17
PAGE I - 10
