Page 47 - Estimators Piping Man Hour Manual
P. 47

30   Section One-SHOP  FABRICATION

                  45° WELDED NOZZLES—BEINFORCED


                               Labor For Cutting And Welding
                                  Carbon Steel Material

                                 NET MAN HOURS EACH
            Standard  Extra
             Pipe   Heavy Pipe               SCHEDULE  NUMBERS
      Size  & OD Sizes &  OD Sizes
      Ins.  3/8 "Thick 1/2"  Thick  20  30  40  60   80   100   120  140   160

      1-1/2   5,9      6.2    --    ..   5.9   --    6.2  --    --    --   8.9
      2       6.0      6.7               6.0         6.7  __    --    --  11.6
      2-1/2   6.8      8.1    ._    _.   6.8   ..    8.1                  12.7
      3       7.6      9.1    --         7.6   --    9.1  --    --    --  14.0
     3-1/2    8.7     10.1          _.   8.7        10.1
     4        9.7     11.7    ._    --   9.7   --   11.7  --   14.5   --  17.6
      5      11.4     13.7    --    --   11.4  --   13.7  --   17.2       21.7
                                                                      —
     6       12.0     14.9               12.0       14.9       21.3   ._  27.3
     8       13.4     18.3   13.4  13.4  13.4  15.3  18.3  22.4  27.8  33.7  37.7
      10     14.7     18.4   14.7  14.7  14.7  18.4  22.0  27.2  37.7  41.4  45.1
      12  OD  16.3    20.6   16.3  16.3  17.2  23.0  30.0  38.7  43.8  51.5  80.1
      14  OD  17.8    23.4   17.8  17.8  19.8  27.6  38.9  44.6  52.7  59.7  68,8
      16  OD  20.  I  25.6   20.1  20.1  25.6  34.0  44.8  55.7  70.0  71.8  79.5
      18 OD  21.6     26.8   21.6  24.9  31.7  42.5  50.4  67.6  70.3  74.1  99,5
     20 OD   23.9     30.2   23.9  30.2  36.9  53.3  60.4  72.5  83.9  96.0  111.8
      24  OD  25.0    32.5   25.0  32.8  43.3  60.5  65.1  82.3  97.4  112.3  130.6


     Pipe  Thickness:  Wall  thickness  of  the  pipe used for  the nozzle determines  the  man hours that
         will apply.  For  nozzles of double extra strong  pipe thickness, use  Schedule 160 man hours.
     Reinforcement:  Man hours are  for  labor  only.  The price  of the nozzle and reinforcing  materials
         must  be added.
     Preheating;  If  specified  or  required by Codes, add for  this operation.  See man hours  for  pre-
         heating.  The  size  and  wall  thickness  of header  (not the size of the nozzle) determines  the
         preheating  man hours.
     Stress  Relieving:  Stress  relieving  of welds in carbon steel material  is  required  by the A.S. A.
         Code  for  Pressure  Piping, where the wall thickness  is  3/4"  or greater.  The size and wall
         thickness  of the header determines the  man hours to be  used  for stress relieving.
         All  pipe  sizes  shown  below  the  ruled line are  3/4"  or greater  in wall thickness  and must
         be stress relieved.  Where  stress  relieving  is  required  an  extra  charge should be made.
         See man hours for stress  relieving.
   42   43   44   45   46   47   48   49   50   51   52