Page 295 - Finite Element Modeling and Simulations with ANSYS Workbench

280 Finite Element Modeling and Simulation with ANSYS Workbench

Step 5: Create a Profile Sketch
To customize units, select the SpaceClaim Options from the File menu. In the
SpaceClaim Options window that opens, click Units from the left naviga-
tion panel, and select Millimeters for Length. Next, change the Minor Grid
Spacing to 10mm. Click OK.

Click on the Plan View icon to display a heads-on view of the sketch grid. Click
the Point icon on the Design tab. Draw ten construction points A through J, as
shown below. Next, Click the Spline icon, and draw a spline passing through
points A through J; double-click at the last construction point to complete the
spline creation.