Page 362 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 362
Introduction to Fluid Analysis 347
Click Pull on the Design tab. In the left Options-Pull panel, click No Merge and
Pull Both Sides, as well as Thicken surfaces. In the Graphics Window, Ctrl-
click the two half-circular surfaces (highlighted in orange), and pull them
along z-axis and enter 0.1m in the box for depth. This will create two additional
Solids in Structure Tree. Each Solid represents half of a wheel. The wheel
width is actually 0.2m because the pull is bi-directional with 0.1m on each side.
Click Mirror on the Design tab. In the Graphics Window, click the bottom face
of the truck to set it as the mirror plane, and Ctrl-click the two half-wheels to
mirror the geometry as follows.
