Page 360 - Finite Element Modeling and Simulations with ANSYS Workbench
P. 360
Introduction to Fluid Analysis 345
Click the Create Rounded Corner icon on the Design tab. Draw two rounded
corners as shown below.
Click on the Pull icon on the Design tab. In the Graphics Window, ctrl-click the
two rectangular surfaces, and pull them along z-axis. Enter 0.8m in the box for
extrusion depth to create a solid. Press Esc to cancel the pull.
In the Graphics Window, click on the side face (with a surface normal pointing
along z-axis as shown below), and click the Sketch Mode icon on the Design
tab to start a new sketch on this face. Click on the Point icon.
