Page 42 - T. Anderson-Fracture Mechanics - Fundamentals and Applns.-CRC (2005)

1656_C01.fm Page 22 Tuesday, April 12, 2005 5:55 PM

22 Fracture Mechanics: Fundamentals and Applications

14. Westergaard, H.M., ‘‘Bearing Pressures and Cracks.” Journal of Applied Mechanics, Vol. 6, 1939,
pp. 49–53.
15. Irwin, G.R., ‘‘Analysis of Stresses and Strains near the End of a Crack Traversing a Plate.” Journal
of Applied Mechanics, Vol. 24, 1957, pp. 361–364.
16. Williams, M.L., ‘‘On the Stress Distribution at the Base of a Stationary Crack.” Journal of Applied
Mechanics, Vol. 24, 1957, pp. 109–114.
17. Wells, A.A., ‘‘The Condition of Fast Fracture in Aluminum Alloys with Particular Reference to Comet
Failures.” British Welding Research Association Report, April 1955.
18. Winne, D.H. and Wundt, B.M., ‘‘Application of the Griffith-Irwin Theory of Crack Propagation to
the Bursting Behavior of Disks, Including Analytical and Experimental Studies.” Transactions of the
American Society of Mechanical Engineers, Vol. 80, 1958, pp. 1643–1655.
19. Paris, P.C., Gomez, M.P., and Anderson, W.P., ‘‘A Rational Analytic Theory of Fatigue.” The Trend
in Engineering, Vol. 13, 1961, pp. 9–14.
20. Irwin, G.R., ‘‘Plastic Zone Near a Crack and Fracture Toughness.” Sagamore Research Conference
Proceedings, Vol. 4, Syracuse University Research Institute, Syracuse, NY, 1961, pp. 63–78.
21. Dugdale, D.S., ‘‘Yielding in Steel Sheets Containing Slits.” Journal of the Mechanics and Physics of
Solids, Vol. 8, 1960, pp. 100–104.
22. Barenblatt, G.I., ‘‘The Mathematical Theory of Equilibrium Cracks in Brittle Fracture.” Advances in
Applied Mechanics, Vol. VII, Academic Press, 1962, pp. 55–129.
23. Wells, A.A., ‘‘Unstable Crack Propagation in Metals: Cleavage and Fast Fracture.” Proceedings of
the Crack Propagation Symposium, Vol. 1, Paper 84, Cranfield, UK, 1961.
24. Rice, J.R., ‘‘A Path Independent Integral and the Approximate Analysis of Strain Concentration by
Notches and Cracks.” Journal of Applied Mechanics, Vol. 35, 1968, pp. 379–386.
25. Eshelby, J.D., ‘‘The Continuum Theory of Lattice Defects.” Solid State Physics, Vol. 3, 1956.
26. Hutchinson, J.W., ‘‘Singular Behavior at the End of a Tensile Crack Tip in a Hardening Material.”
Journal of the Mechanics and Physics of Solids, Vol. 16, 1968, pp. 13–31.
27. Rice, J.R. and Rosengren, G.F., ‘‘Plane Strain Deformation near a Crack Tip in a Power-Law Hardening
Material.” Journal of the Mechanics and Physics of Solids, Vol. 16, 1968, pp. 1–12.
28. Begley, J.A. and Landes, J.D., ‘‘The J-Integral as a Fracture Criterion.” ASTM STP 514, American
Society for Testing and Materials, Philadelphia, PA, 1972, pp. 1–20.
29. E 813-81, ‘‘Standard Test Method for J , a Measure of Fracture Toughness.” American Society for
Ic
Testing and Materials, Philadelphia, PA, 1981.
30. Shih, C.F. and Hutchinson, J.W., ‘‘Fully Plastic Solutions and Large-Scale Yielding Estimates for
Plane Stress Crack Problems.” Journal of Engineering Materials and Technology, Vol. 98, 1976,
pp. 289–295.
31. Kumar, V., German, M.D., and Shih, C.F., ‘‘An Engineering Approach for Elastic-Plastic Fracture
Analysis.” EPRI Report NP-1931, Electric Power Research Institute, Palo Alto, CA, 1981.
32. Burdekin, F.M. and Dawes, M.G., ‘‘Practical Use of Linear Elastic and Yielding Fracture Mechanics
with Particular Reference to Pressure Vessels.” Proceedings of the Institute of Mec hanical Engineers
Conference, London, May 1971, pp. 28–37.
33. Wells, A.A., ‘‘Application of Fracture Mechanics at and beyond General Yielding.” British Welding
Journal, Vol. 10, 1963, pp. 563–570.
34. Harrison, R.P., Loosemore, K., Milne, I., and Dowling, A.R., ‘‘Assessment of the Integrity of Structures
Containing Defects.” Central Electricity Generating Board Report R/H/R6-Rev 2, April 1980.
35. Shih, C.F., ‘‘Relationship between the J-Integral and the Crack Opening Displacement for Stationary
and Extending Cracks.” Journal of the Mechanics and Physics of Solids, Vol. 29, 1981, pp. 305–326.