Page 210 - Fundamentals of Gas Shale Reservoirs
P. 210

190   GEOMECHANICS OF GAS SHALES

            Willson  SM,  Last  NC,  Zoback  MD,  Moos  D.  Drilling  in  South   Yu M, Chen G, Chenevert ME, Sharma MM. Chemical and thermal
              America: stability approach for complex geologic conditions.   effects on wellbore stability of shale formations. In: SPE 71366;
              In: Paper SPE 53940. Presented at the 1999 SPE Latin American   September 30–October 3, 2001; New Orleans, LA; 2001.
              & Caribbean Petroleum Engineering Conference; April 21–23,   Yudhbir RK, Lemanza W, Prinzl F. An empirical failure criterion
              1999; Caracas, Venezuela; 1999.                      for rock masses. In: Proceedings of the 5th international con­
            Willson SM, Edwards ST, Crook A, Bere A, Moos D, Peska P.   gress on rock mechanics, Balkema, Rotterdam, Vol. 1, 1983.
              Assuring stability in extended reach wells‐analyses, practice and   pp. B1–8.
              mitigations. In: SPE/IADC Drilling Conference, 20–22 February,   Zeszotarski JC, Chromik RR, Vinci RP, Messmer MC, Michels R,
              Amsterdam, the Netherlands, SPE/IADC 105405; 2007.   Larsen JW. Imaging and mechanical property measurements
            Xinjing L, Suyun H, Keming C. Suggestions from the development   of kerogen via nano‐indentation. Geochim  Acta 2004;68
              of fractured shale gas in North America. Petrol Exploration Dev   (20):4113–4119.
              2007;34 (4):392–400.                               Zhang L, Radha KC. Stability analysis of vertical boreholes using a
            Yamamoto M. Implementation of the extended leak‐off test in deep   three‐ dimensional Hoek–Brown strength criterion. In: Proceedings
              wells in Japan. In: Sugawra K, editor. Proceedings of the Third   of the GeoFlor‐ida, January 21, 2010, Florida.
              International Symposium on Rock Stress. Rotterdam: Balkema;   Zhang L, Zhu H. Three‐dimensional Hoek–Brown strength crite­
              2003. pp 225e229.                                    rion for rocks. J Geotech Geoenviron Eng  ASCE 2007;133
            Yang Y, Aplin AC. Permeability and petrophysical properties of 30   (9):1128–1135.
              natural mudstones. J Geophys Res 2007;112:B03206. DOI:   Zhong  L, Worthington  MH.  Modeling crosshole  channel  waves.
              1029/2005JB004243.                                   J Seism Explor 1994;3:21–35.
            Yang JH, Gray KE. Behavior of anisotropic rocks under combined   Zhou S. A program to model the initial shape and extent of bore­
              stresses. In: Paper SPE 3098. In: Presented at the 45th annual   hole breakout. Comput Geosci 1994;20:1143–1160.
              fall meeting of the society of petroleum engineers of AIME;   Zhou SH, Hillis RR, Sandiford M. On the mechanical stability of
              October 4–7, 1970; Houston, TX; 1970.                inclined wellbores. SPE Drill Completion 1996;11:67–73.
            Yew CH, Chenevert ME, Wang CL, Osisanya SO. Wellbore stress   Zoback MD, Barton CA, Brudy M, Castillo DA, Finkbeiner  T,
              distribution produced by moisture adsorption. In: SPE 19536,   Grollimund BR, Moos DB, Peska P,  Ward CD,  Wiprut DJ.
              TX, USA, December, 1990; 1989. 8 pp.                 Determination of stress orientation and magnitude in deep
            You MQ. True‐triaxial strength criteria for rock. Int J Rock Mech   wells. Int J Rock Mech Mining Sci 2003;40:1049e1076.
              Mining Sci 2009;46:115–127.
   205   206   207   208   209   210   211   212   213   214   215