Page 261 - Fundamentals of Gas Shale Reservoirs

REFERENCES 241
solutions to interpret the orientations of natural reservoir REFERENCES
fractures and calibrate DFN models by using nodal planes as
interpretations of reservoir fracture orientations (e.g., Eisner Abers GA, Gephart JW. Direct inversion of earthquake first motions
et al., 2010b; Williams‐Stroud et al., 2012). Recently, direct for both the stress tensor and focal mechanisms and application
fracture images have been used for DFN simulations both as to southern California. J Geophys Res Solid Earth 2001;106
planes that approximate the fracture images (Doe et al., 2013), (B11):26523–26540.
by using tessellated fracture images to calibrate stochastic Allmendinger R, Gephart JW, Marrett A. Notes on fault‐slip anal­
DFN models, and by directly incorporating the tessellated ysis. Geological Society of America Short Course “Quantitative
images as discrete features in DFN simulations (Lacazette Interpretation of Joints and Fault”; 1989. 59 p. (available online).
et al., 2014). In contrast to DFN simulation, Moos et al. (2011) Anderson EM. Dynamics of faulting. Trans Edinburgh Geol Soc
use a dual‐porosity, dual‐permeability simulator in conjunction 1905;8:387–402.
with downhole hypocenter and natural fracture data collected Anderson EM. Dynamics of Faulting and Dyke Formation with
in the wellbore to simulate stimulation and reservoir response Application to Britain. 2nd ed. Edinburgh: Oliver and Boyd;
in a shale reservoir. 1951. p 183.
Arnold R, Townend J. A Bayesian approach to estimating tectonic
stress from seismological data. Geophys J Int 2007;170:1336–1356.
10.7 CONCLUSIONS DOI: 10.1111/j.1365‐246X.2007.03485.x.
Artman B, Podladtchikov IB, Witten B. Source location using time‐
reverse imaging. Geophys Prospecting 2010;58:861–873.
Passive seismic data is currently the best method available for
mapping the effects of hydraulic fracture treatments in uncon­ Barton N, Stephansson O (eds). Rock Joints. Rotterdam: A. A.
ventional oil and gas reservoirs. This contribution has reviewed Balkema, 1990. p. 35–44.
how downhole and surface passive seismic studies differ, the Barton CA, Zoback MD, Moos D. Fluid flow along potentially
major products of passive seismic studies, and how the prod­ active faults in crystalline rock. Geology 1995;23 (8):683–686.
ucts are generated from downhole and/or surface‐derived Copeland D.M. and Lacazette, A., 2015 in press, Fracture surface
microseismic data. Standard passive seismic products are extraction and stress field estimation from three­dimensional
microseismic data. URTeC 2155064, 10 p.
MEQ locations, MEQ focal mechanism solutions, images of
cumulative seismic activity, and fracture images derived from Das I, Zoback MD. Long‐period, long‐duration seismic events during
hydraulic stimulation of shale and tight‐gas reservoirs—Part 1:
cumulative seismic activity volumes. At the time of this Waveform characteristics. Geophysics 2013a;78(6 [Nov‐Dec]):
writing, the latter two products were available only from sur­ KS97–KS108.
face‐based studies because uniform coverage is required to Das I, Zoback MD. Long‐period long‐duration seismic events dur­
compute them. Useful information interpreted from these ing hydraulic stimulation of shale and tight‐gas reservoirs—Part
results include frac height, width, and volume; neostress 2: Location and mechanisms. Geophysics 2013b;78(No. 6
orientation, stress compartmentalization, and stress changes [Nov‐Dec]:KS109–KS117.
caused by fracture treatments; how hydraulic fractures interact Dershowitz WS, Cottrell MG, Lim D‐H, Doe TW. A discrete fracture
with the pre‐existing natural fracture system; and large‐scale network approach for evaluation of hydraulic fracture stimulation
features of the natural fracture flow system at reservoir scale. of naturally fractured reservoirs. 44th U.S. Rock Mechanics
All of these products are unavailable from other methods. The Symposium and 5th U.S.‐Canada Rock Mechanics Symposium,
greatest value of passive seismic data is achieved by using the 27–30 June, Salt Lake City, Utah; 2010. 8 p.
results to build better frac, well‐test, and reservoir simulators. Doe T, Lacazette A, Dershowitz W, Knitter C. Evaluating the effect of
Improved simulators lead to better, more cost‐effective frac natural fractures on production from hydraulically fractured wells
designs and development plans, better production, and using Discrete Fracture Network models. Paper SPE 168823/
better production forecasts and reserve estimates. Passive URTeC 1581931, Proceedings, First Unconventional Resources
seismic monitoring is a rapidly advancing field. Engineering Technology Conference. Society of Petroleum Engineers, 12–14
methodologies for applying the data are advancing equally August, Denver, CO, USA; 2013.
rapidly. Passive seismic monitoring has been a growth industry Du J, Warpinski NR. Uncertainty in FPSs from moment‐tensor
for many years. Recent and continuing technological develop­ inversion. Geophysics 2011;76:WC65–WC75. DOI: 10.1190/
geo2011‐0024.1.
ments are likely to result in yet greater application of these
methods in the future. Duncan PM. Is there a future for passive seismic? First Break
2005;23:111–115.
Duncan PM,Eisner L. Reservoir characterization using surface
microseismic monitoring. Geophysics 2010;75(5 [September‐
ACKNOWLEDGMENTS October]):A139–A146.
Eisner L, Hulsey BJ, Duncan P, Jurick D, Werner H, Keller W. Com parison
This manuscript was improved greatly by the capable reviews of surface and borehole locations of induced seismicity. Geophys
of Amanda Klaus and Jan Vermilye. Prospecting 2010a. DOI: 101111/j.1365‐2478.2010.00867.x.