Page 303 - gas transport in porous media

Chapter 17: Subsurface Flow Measurements
REFERENCES
Airflow Technical Products, Inc., www.airflow.com 301
Baker, R. C., and Gimson, C. The effects of manufacturing methods on the precision of insertion and
in-line thermal mass flowmeters. Flow. Meas. Instrum., 2001; (12):113–121.
Beck, S. B. M., and Mazille, J. A study of a differential flow meter that is insensitive to inlet conditions.
Flow. Meas. Instrum., 2002; (12):379–384.
Blond, A. N., and Downing, P. M. Rotating vanes vrs thermal anemometry technology. Technical Topic
I003: Airflow Technical Products, 2002.
Brassier, P., Hosten, B., and Vulovic, F. High-frequency transducers and correlation method to enhance
ultrasonic gas flow metering. Flow. Meas. Instrum., 2001; (12):201–211.
Calogirou, A., Boekhoven, J., and Henkes, R. A. W. M. Effect of wall roughness changes on ultrasonic
gas flowmeters. Flow. Meas. Instrum., 2001; (12):219–229.
Dane, H.J. Ultasonic measurement of unsteady gas flow. Flow. Meas. Instrum., 1997; 8 (3/4):183–190.
Gan, G., and Riffat, S. B. Pressure loss characteristics of orifice and perforated plates. Experimental
Thermal and Fluid Science, 1997; (14):160–165.
Guillen, M., Five equations that changed the world. New York: MJF Books, 1995.
Ismail, R., and Davidian, S. AVS Technical Document 1001, Cambridge AccuSense, Inc., Shirley, MA.,
1999.
King, L.V. On the convection of heat from small cylinders in a stream of fluid. Philos. Trans. R. Soc. A,
1914; 214–373.
Krassow, H., Campabadal, F., and Lora-Tamayo, E. The smart-orifice meter: a mini head meter for volume
flow measurement. Flow. Meas. Instrum., 1999; (10):109–115.
Martin, D. P., Grant, J. J., and Ringwood, J. V. Evaluation of a prototype thermal anemometer for use in
low airspeed drying measure calculations. Flow. Meas. Instrum., 2002; (12):385–396.
Nguyen, N. T. Micromachined flow sensors - a review. Flow Meas. Instrum., 1997; 8 (1):7–16.
Nilsson, U. R. F., and Delsing, J. In situ detection of inaccurate gas flow meters using a fingerprint
technique. Flow Meas. Instrum., 1998; 9:143–152.
Pesarini, A. J., Bigot, R., Nadal Mora, V. J., Di Bernardi, C. A., and Ringegni, P. J. Theoretical analysis
related to aspects of the pitot probe methodology in flow rate determination for blowers performance
tests. Flow. Meas. Instrum., 2002; (12):373–377.
Pnueli, D., and Gutfinger C., Fluid Mechanics. Mass: Cambridge University Press, 1992.
TSI Incorporated, www.tsi.com
Urner, G. Pressure loss of orifice plates according to ISO 5167-1. Flow. Meas. Instrum., 1997; (8) 1:39–41.
Viswanathan, M., Kandaswamy, A., Sreekala, S. K., and Sajna, K. V. Development, modeling and certain
investigations on thermal mass flow meters. Flow. Meas. Instrum., 2002; (12):353–360.