Page 269 - Improving Machinery Reliability

240 Improving Machinery Reliability

Topics in Fluid Film Bearing and Rotor Bearing Systems, Design and Optimiza-
tion, ASME Publication Book No. 1001 18, pp. 55-78 (1978).
22. Wachel, J. C., et al, Rotordynamics of Machinery, Engineering Dynamics Incor-
porated Report ED1 86-334 (April 1986).
23. Stroh, C. G., “Rotordynamic Stability-A Simplified Approach,” 14th Turboma-
chinery Symposium, Texas A&M University, 1985.
24. Frej, A., Grgic, A. and Heil, W., “Design of Pump Shaft Trains Having Variable-
Speed Electric Motors,” 3rd International Pump Symposium, Texas A&M Uni-
versity, 1986.
25. Wachel, J. C., et al, Vibrations in Reciprocating Machinery and Piping, Engi-
neering Dynamics Incorporated Report ED1 85-305 (October 1985).
26. Szenasi, F. R. and Von Nimitz, W., “Transient Analysis of Synchronous Motor
Trains,” 7th Turbomachinery Symposium, Texas A&M University, 1978.
27. Wachel, J. C., Von Nimitz, W., and Szenasi, F. R., “Case Histories of Special-
ized Turbomachinery Problems,” 2nd Turbomachinery Symposium, Texas A&M
University, 1973.
28. Van Laningham, F. L. and Wood, D. E., “Fatigue Failures of Compressor
Impellers and Resonance Excitation Testing,” 8th Turbomachinery Symposium,
Texas A&M University, 1979.
29. Bultzo, C., ‘‘Analysis of Three Impeller Failures: Experimental Techniques Used
to Establish Causes,” 4th Turbomachinery Symposium, Texas A&M University,
1975.
30. Sohre, J. S., “Steam Turbine Blade Failure, Causes and Corrections,” 4th Turbo-
machinery Symposium, Texas A&M University, 1975.
31. Sparks, C. R. and Wachel, J. C., “Pulsations in Liquid Pump and Piping Sys-
tems,” 5th Turbomachinery Symposium, Texas A&M University, 1976.
32. Smith, D. R. and Simmons, H. R., “Unique Fan Vibration Problems: Their Caus-
es and Solutions,” 9th Turbomachinery Symposium, Texas A&M University,
1980.
33. Taylor, I., “The Most Persistent Pump-Application Problem for Petroleum And
Power Engineers,” ASME Paper No. 77-Pet-5, presented in Houston, September,
1977.
34. Nelson, W. E., “Pump Curves Can Be Deceptive,” Proceedings of NPRA Refin-
ery and Petrochemical Plant Maintenance Conference, 1980, pp. 141-150.
35. “Hydraulic Institute Standards,” 12th Edition, The Hydraulic Institute, New
York, 1969.
36. Fraser, W. H., “Flow Recirculation In Centrifugal Pumps,” 10th Turbomachinery
Symposium, Texas A&M University, 198 1.
37. McQueen, R., “Minimum Flow Requirements for Centrifugal Pumps,” Pump
World, 1980, Volume 6, Number 2, pp. 10-15 (Ibid).
38. Eschmann, Hasbargen, Weigand, Ball and Roller Bearings, John Wiley & Sons,
New York, 1983.
39. Bloch, H. P., “Improve Safety and Reliability of Pumps and Drivers,” Hydrocar-
bon Processing, January, 1977.
40. Bloch, H. P., “Optimized Lubrication of Antifriction Bearings for Centrifugal
Pumps,” ASLE Paper No. 78-AM-ID-1, presented in Dearborn, Michigan, April
17. 1978.