Page 353 - MEMS and Microstructures in Aerospace Applications

Osiander / MEMS and microstructures in Aerospace applications DK3181_c015 Final Proof page 346 1.9.2005 12:53pm

346 MEMS and Microstructures in Aerospace Applications

23. Maboudian, R. and Howe, R.T., Critical review: adhesion in surface micromechanical
structures. Journal of Vacuum Science & Technology B: Microelectronics Processing
and Phenomena, 15 (1), 1, 1997.
24. Denton, H. and Davison, M., Processing variables for the reduction of stiction on MEMS
devices. Proceedings of SPIE — 3874, 113–119, 1999.
25. Proceedings of the 1999 Micromachining and Fabrication Process Technology V,
September 20–22, 1999, 3874, 1999, 113–119.
26. Allameh, S.M., An introduction to mechanical-properties-related issues in MEMS struc-
tures. Journal of Materials Science, 38 (20), 2003, 4115–4123.
27. Muhlstein, C.L., Brown, S.B., and Ritchie, R.O., High-cycle fatigue and durability of
polycrystalline silicon thin films in ambient air. Sensors and Actuators, A: Physical,94
(3), 2001, 177–188.
28. Nelson, W., Accelerated Testing: Statistical Models, Test Plans and Data Analyses. New
York, NY, 1990.
29. Bonnie, F. and James, C., The natural space environment effects on spacecraft. In NASA
Reference Publication 1350, 1994.
30. Brown, S.B., Van Arsdell, W., and Muhlstein, C.L., Materials reliability in MEMS
devices, IEEE Proceedings, 1997, 591–593.
31. Chiou, J.A., Chen, S., and Jiao, J., Humidity-induced voltage shift on MEMS pressure
sensors. Journal of Electronic Packaging, Transactions of the ASME, 125 (4), 2003,
470–474.
32. de Boer, M.P., et al., Adhesion, Adhesion Hysteresis and Friction in MEMS under
Controlled Humidity Ambients, American Society of Mechanical Engineers, Materials
Division MD84, ASME, Fairfield, NJ, 1998, 127–129.
33. Gunda, N., Jha, S.K., and Sastri, S.A., Anti-stiction coatings for MEMS devices,
Advanced Materials and Processes, 162 (9), 2004, 27–28.
34. Walraven, J.A., et al., Electrostatic discharge/electrical overstress susceptibility in
MEMS: a new failure mode, Proceedings of SPIE — 2000, 30–39.
35. Walraven, J.A., et al., Failure analysis of electrothermal actuators subjected to electrical
overstress (EOS) and electrostatic discharge (ESD), Proceedings of the 30th Inter-
national Symposium for Testing and Failure Analysis, ISTFA 2004, 9639, 2004,
225–231.

© 2006 by Taylor & Francis Group, LLC