Page 252 - Make Your Own PCBs with EAGLE from Schematic Designs to Finished Boards
P. 252
FIGURE 11-15 Making connections from pins to pads.
Our part is now complete. Don’t forget to save it. You can try adding it to a schematic. Remember
that because the device has a number of gates, the first two times that you add it to the schematic, it
will add a triode symbol, and the third time it will add the heater supply symbol. You can also switch
over to make sure that the board layout looks okay too. Figure 11-16 shows the device as used in a
schematic.
