Page 153 - Robots Androids and Animatrons : 12 Incredible Projects You Can Build
P. 153
are mounted on a small piece of wood or plastic (see Fig. 6.31). Two
small holes are drilled for each CdS cell for the wire leads to pass
through. Longer wires are soldered onto these wires and connected
to the PIC microcontroller.
1
3
One ″ to ″ hole is drilled for the gearbox motor’s shaft. The
32 8
sensor array is glued to the gearbox motor shaft (see Fig. 6.32).
132 6.31 Construction on sensor array
6.32 Photograph of sensor array on gearbox motor
Team LRN
Chapter six
