Page 53 - Using ANSYS for Finite Element Analysis Dynamic, Probabilistic, Design and Heat Transfer Analysis
P. 53

40  •   using ansys for finite eLement anaLysis

                                                 Y



                                        UZ = 0;    UX = 0


                              Symmetric boundary
                               condition (ux=0)



                           a                                          X
                                                                    UZ = 0;
                                                                    UY = 0
                  UZ = 0;                       Symmetric boundary
                                                  condition (uy=0)
                  UY = 0

                                         UZ = 0;    UX = 0

                                                 a



                   9. Apply pressure load.
                  10. Obtain solution.
                  11. Review results.
                  12. Exit the ANSYS program.



                2.3.3  Step-by-Step ANAlySiS

                                Utility Menu >File>Change title
                Enter Simply Supported Laminated Plate (SHELL99) then OK.











                  1.  Set preferences
                     In preparation for defining materials, you will set preferences so
                     that only materials and elements that pertain to a structural analysis
                     are available for you to choose. To set preferences:
   48   49   50   51   52   53   54   55   56   57   58