Page 105 - 15 Dangerously Mad Projects for the Evil Genius

84 15 Dangerously Mad Projects for the Evil Genius

Figure 8-4 Schematic diagram for the LED module

What You Will Need they are common anode (the positive connections
of each of the three LEDs connected together) and
You will need the following components to build
that the pin connections are the same as indicated
the Arduino-controlled LED module. They are
in the schematic diagram of Figure 8-4. It is
listed in the Parts Bin.
always worth checking the LED’s data sheet.
Later in this chapter, you will find the
LEDs with a diffuse lens produce a better effect
component listing for the motor controller.
than those with a clear lens. However, if only
The LEDs can be quite expensive when bought clear-lens LEDs are available, you can gently
from a regular component supplier. You can get a roughen the front of the LED with sandpaper to
better deal on eBay. When buying them, make sure give it a frosted effect.