Page 151 - An Introduction to Microelectromechanical Systems Engineering

130 MEM Structures and Systems in Industrial and Automotive Applications

[12] Muller, R. S., and K. Y. Lau, “Surface-Micromachined Microoptical Elements and Sys-
tems,” in Integrated Sensors, Microactuators, & Microsystems (MEMS), K. D. Wise (ed.),
Proceedings of the IEEE, Vol. 86, No. 8, August 1998, pp. 1705–1720.
[13] Pister, K. S. J., et al., “Microfabricated Hinges,” Sensors and Actuators, Vol. A33, No. 3,
June 1992, pp. 246–256.
[14] Czarnocki, W. S., and J. P. Schuster, “The Evolution of Automotive Pressure Sensors,” Sen-
sors, Vol. 16, No. 5, May 1999, pp. 52–65.
[15] NPC-107 data sheet, GE NovaSensor, 1055 Mission Court, Fremont, CA 94539,
http://www.novasensor.com.
[16] Johnson, R. G., and R. E. Higashi, “A Highly Sensitive Silicon Chip Microtransducer for Air
Flow and Differential Pressure Sensing Applications,” Sensors and Actuators, Vol. 11,
1987, pp. 63–72.
[17] Roylance, L. M., and J. B. Angell, “A Batch Fabricated Silicon Accelerometer,” IEEE Trans.
Electron Devices, Vol. 26, No. 12, 1979, pp. 1911–1917.
[18] “Automotive Sensor Market,” Market Report by Strategy Analytics, Inc., 199 Wells Ave-
nue, Newton Centre, MA, 02459, February 2003.
[19] Suminto, J. T., “A Wide Frequency Range, Rugged Silicon Micro Accelerometer with Over-
range Stops,” Proc. 9th Annual Int. Workshop on Micro Electro Mechanical Systems, San
Diego, CA, February 11–15, 1996, pp. 180–185.
[20] Sasayama, T., et al., “Highly Reliable Silicon Micro-Machined Physical Sensors in Mass
Production,” Proc. 8th Int. Conf. on Solid-State Sensors and Actuators, Stockholm, Swe-
den, June 25–29, 1995, pp. 687–690.
[21] Chau, K. H. –L., et al., “An Integrated Force-Balanced Capacitive Accelerometer for Low-G
Applications,” Proc. 8th Int. Conf. on Solid-State Sensors and Actuators, Stockholm, Swe-
den, June 25–29, 1995, pp. 593–596.
[22] Offenberg, M., et al., “Novel Process for a Monolithic Integrated Accelerometer,” Proc. 8th
Int. Conf. on Solid-State Sensors and Actuators, Stockholm, Sweden, June 25–29, 1995,
pp. 589–592.
[23] Van Drieënhuizen, B. P., et al., “Force-Balanced Accelerometer with mG Resolution,
Fabricated Using Silicon Fusion Bonding and Deep Reactive Ion Etching,” Proc. 1997 Int.
Conf. on Solid-State Sensors and Actuators, Chicago, IL, June 16–19, 1997, Vol. 2,
pp. 1229–1230.
[24] “Inertial Technology for the Future,” R. R. Ragan (ed.), IEEE Transactions on Aerospace
and Electronic Systems, Vol. AES-20, No. 4, July 1984, pp. 414–444.
[25] Emiliani, C., The Scientific Companion, 2nd ed., New York: Wiley, 1995, pp. 204–205.
[26] Beer, F. P., and E. R. Johnston, Jr., Vector Mechanics for Engineers: Dynamics, 3rd ed.,
New York: McGraw-Hill, 1977, pp. 716–719.
[27] Söderkvist, J., “Micromachined Gyroscopes,” Sensors and Actuators, Vol. A43, 1994,
pp. 65–71.
[28] Yazdi, N., F. Ayazi, and K. Najafi, “Micromachined Inertial Sensors,” in Integrated Sen-
sors, Microactuators, & Microsystems (MEMS), K. D. Wise (ed.), Proceedings of the IEEE,
Vol. 86, No. 8, August 1998, pp. 1640–1659.
[29] Chang, S., et al., “An Electroformed CMOS Integrated Angular Rate Sensor,” Sensors and
Actuators, Vol. A66, 1998, pp. 138–143.
[30] Langdon, R. M., “The Vibrating Cylinder Gyroscope,” The Marconi Review, Fourth Quar-
ter, 1982, pp. 231–249.
[31] Voss, R., et al., “Silicon Angular Rate Sensor for Automotive Applications with Piezoelec-
tric Drive and Piezoresistive Read-Out,” Proc. 1997 Int. Conf. on Solid-State Sensors and
Actuators, Chicago, IL, June 16–19, 1997, Vol. 2, pp. 879–882.
[32] Lutz, M., et al., “A Precision Yaw Rate Sensor in Silicon Micromachining,” Proc. 1997 Int.
Conf. on Solid-State Sensors and Actuators, Chicago, IL, June 16–19, 1997, Vol. 2,
pp. 847–850.